News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Boxing LCAs and Steering

Started by chargedup68, September 24, 2005, 01:55:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chargedup68

September 24, 2005, 01:55:29 PM
There was an a post on the old site regarding boxing the Lower control arms and gusseting the steering box mount.  Does anyone have pictures or any recommendations for this?
68 Charger, 608/683 505 cu in. Muscle Motors Stroker, MASS Flo EFI. Reilly Motorsports Alterkation/Street Lynx suspension, Wilwood brakes, Strange Dana 60 4.11 gears, Tremec TKO 600

MTPOCKET

#1
September 24, 2005, 08:56:59 PM
Just follow the instruction that comes with the kit and you should have no problems installing them. Here is a pic. Just add some more welds to the steering box mount to strength the factory welds.

chargedup68

#2
September 25, 2005, 09:02:43 AM
Thanks, where did you det the kit from?  I was going to make my own, but if it isn't much more expensive then I will just buy the kit.
68 Charger, 608/683 505 cu in. Muscle Motors Stroker, MASS Flo EFI. Reilly Motorsports Alterkation/Street Lynx suspension, Wilwood brakes, Strange Dana 60 4.11 gears, Tremec TKO 600

firefighter3931

#3
September 25, 2005, 09:45:44 AM
I did the same....got them from Magnumhp.com for $20.00

Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs
Print
Go Up Pages1
User actions