News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Motor Mounts

Started by doitmopar, August 24, 2007, 12:43:03 AM

Previous topic - Next topic

doitmopar

What are the best mounts for a 451 in a 72 Charger any suggestion welcome.The stock don't last so would soild be better,or do i need a little give?Thanks :brickwall:

71charger_fan

You can try a pricy alternative such as Schumacher's poly-locs http://engine-swaps.com/ or you could do as I did and just drill through a stock mount for the driver's side and put a grade 8 bolt through it. The mount still compresses and absorbs vibration and the bolt will keep it from ripping apart. After replacing several mounts, I finally took a buddy's advice and put the bolt through a stock mount. I haven't had to replace an engine mount in over 10 years.

firefighter3931

68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs