5.7 Hemi Crate engine

[greatwn73]

Has anyone installed one of these ? What trans, assy, exhaust, mounts, fuel system. (see I WON) in General Discussion

[Charger74]

I haven't but I have heard small block 727 cans, there are headers made for the 5.7.  Fuel system you will need something setup for fuel injection, typically electric fuel pump (best if in tank).   As for mounts and other things not sure, you might want to check with XV Motorsports or on there website and see.  I know there have been several people that have put those in.  Congrats on the win and hope you can find a use for it.

[ChargerSG]

727 and 4 speed for smallblock blots right up, you just have to take the flexiplate of some and it will work just fine. You can buy a plug and play wiring from servral companys. Mounts i have seen on Ebay for cheap money. Check TTi expensive but you will find everything. And you to have a fuelcell or a Durango tank or something since you to have 3 lines, its easyier with the carb modell.

Good luck! I aborted my convertion but i took a truck 5.7L Hemi with original 5 speed and that was overkill

[greatwn73]

Thanks, the wiring harness ,contol box and truck exh manifolds came with it.   

Found a company called PFC enterprises that sells a kits for A, B and E bodys that include mounts ,headers, oil pan,pick up tube and oil filter block off. Dealer told me I could also use a 518 trans and manually operate the OD and lockup.