News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

MoparStuart's Convertible Superbird Project Pic's

Started by MOPARHOUND!, August 17, 2007, 01:29:18 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 94 95 96 97
User actions

BigBlockSam

#2375
June 12, 2015, 05:50:18 PM
did you dunk them in acid? they came out so nice and shiney . my 6 pak runs good but looks old
.  :cheers:
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

moparstuart

#2376
June 15, 2015, 07:56:24 AM
Quote from: Dave Kanofsky on June 11, 2015, 08:03:02 PM
Quote from: moparstuart on June 11, 2015, 08:04:57 AM
:popcrn: :popcrn: :popcrn:  due to the recent changes and updates on my car  what is wrong in this picture  ?   :scratchchin: :icon_smile_big: 

I'm goin' with the kickdown linkage... :poke: :punkrocka: :woohoo: :rock:
you got it  ,  :cheers: 
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

ACUDANUT

#2377
June 15, 2015, 01:34:52 PM
Quote from: ACUDANUT on June 11, 2015, 03:34:02 PM
So who is working on those carbs ?  I know those ain't your hands.  :scratchchin:

So Who is the Carb wizard ?  Cough it up please. I need help too. Help a fellow Kansas Mafia guy out.
BTW, did you go to the HPAC car show ? Any Pic's. ?

Stu, what's the big secret. ? I don't get you  :shruggy:

Howie

#2378
June 17, 2015, 11:42:15 AM
Stu didnt you send your carbs to holley in kentucky?  I sent my nascar carb there and it came back looking new and performed awsome.

Howie

moparstuart

#2379
June 17, 2015, 12:23:38 PM
Quote from: Howie on June 17, 2015, 11:42:15 AM
Stu didnt you send your carbs to holley in kentucky?  I sent my nascar carb there and it came back looking new and performed awsome.

Howie
Mine looked ok but the center carb has never run right ,  and everyone still says the coating color is wrong.    Scott Smith harms in the northwest does then the correct color  .
Anyways the center carb has always run like crap  .  Now so far they run great and dont dump raw fuel in my Motor  , Evl Bob my carb guy found some original cork gaskets small old dried up ones still in the carb also , where holley hadnt even dug all the way into the thing  .  So far I very happy but this next few days will be the test . Im headed out tomorrow on a 500 mile trek across Kansas ( The Kansas Mopar Cruise )  we end up at the Wam show in wichita saturday .      
https://www.facebook.com/ksmoparcruise/posts/1581416258804307     and      http://www.wichitamopar.com/
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

ACUDANUT

#2380
June 18, 2015, 01:29:43 PM
Quote from: ACUDANUT on June 15, 2015, 01:34:52 PM
Quote from: ACUDANUT on June 11, 2015, 03:34:02 PM
So who is working on those carbs ?  I know those ain't your hands.  :scratchchin:

So Who is the Carb wizard ?  Cough it up please. I need help too. Help a fellow Kansas Mafia guy out.
BTW, did you go to the HPAC car show ? Any Pic's. ?

Stu, what's the big secret. ? I don't get you  :shruggy:

???

moparstuart

#2381
June 20, 2015, 02:42:28 AM
https://www.youtube.com/watch?v=7TFCpMbBbDQ&feature=youtu.be



Birdible Video On the Kansas Mopar Cruise
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Charger-Bodie

#2382
June 20, 2015, 06:46:16 AM
No burn outs?
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

ACUDANUT

#2383
June 20, 2015, 09:41:44 AM
Quote from: ACUDANUT on June 18, 2015, 01:29:43 PM
Quote from: ACUDANUT on June 15, 2015, 01:34:52 PM
Quote from: ACUDANUT on June 11, 2015, 03:34:02 PM
So who is working on those carbs ?  I know those ain't your hands.  :scratchchin:

So Who is the Carb wizard ?  Cough it up please. I need help too. Help a fellow Kansas Mafia guy out.
BTW, did you go to the HPAC car show ? Any Pic's. ?

Stu, what's the big secret. ? I don't get you  :shrug
???

moparstuart

#2386
June 20, 2015, 05:31:00 PM
Quote from: Charger-Bodie on June 20, 2015, 06:46:16 AM
No burn outs?
broke a motor mount  , had to baby it to just get it home 
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

skip68

#2387
June 21, 2015, 11:35:00 AM
I'm sure you know about the bolt trick for motor mounts stu.   :shruggy:
If not Ron has it stickied in engine topics.   It's the way to go.  :2thumbs:  I did it after breaking 2 mounts and never had trouble after that.   
skip68, A.K.A. Chuck \ 68 Charger 440 auto\ 67 Camaro RS (no 440)       FRANKS & BEANS !!!

birdsandbees

#2388
June 21, 2015, 01:43:51 PM
When I was 17 I ran a chain on my left engine side so that the engine couldn't lift too far, but still got tired of breaking mounts with the 4 gear. I changed it to a solid steel mount at 18 or so and added about 30,000 flawless miles of clutch dumping. Still fine after all these years... 35 of them to be exact and certainly no engine vibration / wear issues that everyone warned about. I now see that, in those three decades, they've come out with a fancy rubber center, steel flange overlapping mount that can't shear clean like the old ones.
1970 'Bird RM23UOA170163
1969 'Bee WM21H9A230241
1969 Dart Swinger LM23P9B190885
1967 Plymouth Barracuda Formula S
1966 Plymouth Satellite HP2 - 9941 original miles
1964 Dodge 440 62422504487

moparstuart

#2389
June 22, 2015, 04:27:17 PM
Quote from: birdsandbees on June 21, 2015, 01:43:51 PM
When I was 17 I ran a chain on my left engine side so that the engine couldn't lift too far, but still got tired of breaking mounts with the 4 gear. I changed it to a solid steel mount at 18 or so and added about 30,000 flawless miles of clutch dumping. Still fine after all these years... 35 of them to be exact and certainly no engine vibration / wear issues that everyone warned about. I now see that, in those three decades, they've come out with a fancy rubber center, steel flange overlapping mount that can't shear clean like the old ones.
thats the way im going the left side solid and the right side standard every one i talked to said this works great and doesnt shake you to death
also it will fix my exhaust gasket problem the motor moves so much im killing the gasket seals   

just bought these but will only use the left one http://www.summitracing.com/parts/mor-62520
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

birdsandbees

#2390
June 22, 2015, 06:13:56 PM
Yes.. that looks really familiar, been a long time since I was under there. That's what's on mine... solid left, regular OEM rubber from at least '79 on right.
1970 'Bird RM23UOA170163
1969 'Bee WM21H9A230241
1969 Dart Swinger LM23P9B190885
1967 Plymouth Barracuda Formula S
1966 Plymouth Satellite HP2 - 9941 original miles
1964 Dodge 440 62422504487

moparstuart

#2391
August 01, 2016, 10:52:51 PM
bump for you Gator
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2392
January 02, 2017, 11:02:56 PM
ddeed\
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2393
July 07, 2017, 09:16:25 PM
My Score for the Day
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2394
July 20, 2024, 05:50:58 AM
ripped out all the interior and the dash  going to sound deaden and rewiring the whole car  , wish me luck to get it done before october for the aero car reunion   
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2395
July 20, 2024, 06:05:40 AM
IMG_3313.jpeg
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2396
July 20, 2024, 06:06:59 AM
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Swampwing2

#2397
July 26, 2024, 10:02:02 AM
Quote from: moparstuart on July 20, 2024, 05:50:58 AMripped out all the interior and the dash  going to sound deaden and rewiring the whole car  , wish me luck to get it done before october for the aero car reunion   

I am in the process of doing some sound deadening and improving some things to mine as well, to make the trip to the aero car reunion more enjoyable. Hope to see you there!

moparstuart

#2398
August 01, 2024, 10:54:48 AM
IMG_3523.jpeg cut out holes to make a three speaker dash
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

moparstuart

#2399
August 01, 2024, 10:56:31 AM
Amazon basic saved me a ton of money and went down great. Was really impressed. With it so far
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE
Print
Go Up Pages 1 ... 94 95 96 97
User actions