MoparStuart's Convertible Superbird Project Pic's

[FJ5WING]

Hey Stuart...call Bob at Glen-ray. They are repopping them for a reasonable cost.

http://www.hemiradiators.com/products.asp?cat=2

[pettybird]

that's not a bad price at all...G-R quality is off the charts, too.

The trans cooler I installed for a PS cooler works really well.  I think I needed the extra capacity due to the 5.7's higher pressure pump feeding the old box and having its pressure bypass open a lot...

[moparstuart]

Hey Stuart...call Bob at Glen-ray. They are repopping them for a reasonable cost.

http://www.hemiradiators.com/products.asp?cat=2

its just for my clone , I'm going to make mine work  !!!!!      If it was an original bird I'd be all over that one

[BigBlockSam]

that's not a bad price at all

not cheap . i have an original one that came on a motor i bought . i didn't know they where worth that much.

[moparstuart]

that's not a bad price at all

not cheap . i have an original one that came on a motor i bought . i didn't know they where worth that much.

yup just a small part should be like 50.00    

[moparstuart]

 winter upgrades are going on ,  got really lucky in october and won a chevy crate . so after paying some bill with the profits . I'm doing some winter upgrades

  I didnt need a chevy crate motor so i sold it the day after i won it  .    I hit a huge chuck hole and my new exhaust manifolds started leaking so i got the big thick ones again .

[moparstuart]

The car still had it original 383 torsion bars so i upgrade to the one inch Hemi bars .  With the six pac motor and the big long nose cone added the car bottomed out easy . 

[BigBlockSam]

what material are those gaskets  made from?

[moparstuart]

what material are those gaskets  made from?

dont know ? its kinda spongy and metalic looking  ?? 

   here is the place                     http://catalog.remflex.com/

[moparstuart]

the car still had the original brake proportioning valve for drums and a wrong 69 style drum master cylinder .  This did not work really well with the front disc upgrade to I'm finally putting the correct stuff on a valve from a junk yard volare and a new master . oh yeah  picture of the incorrect 69 cylinder still on the car .

[moparstuart]

 

[moparstuart]

   I also ordered a  Steer & gear firm feel stage II  steering box   



http://www.steerandgear.com/



   should get all the slack out of the steering and make it steer like a newer car   

[moparstuart]

 

[moparstuart]

    couple more pictures of the wrong 69 style master

[moparstuart]

   also tossing my single electric pusher fan , upgrading to two pushers with schrouds I puller out of a junk 99 cady catera out of my salvage yard   

[moparstuart]

  front and rear sway bars also being installed on the car , should steer and handle so much better   

[moparstuart]

   the convertible has become a truck  , every thing packed in and ready to transport to my buddys shop for install
 packed it up last weds. night and they came and picked up the car thursday .  

[moparstuart]

 Found in the salvage cars that come in some cup holders that remove very easy ,  great to put out and throw in the trunk at shows 

  very convient  to use 

[moparstuart]

  if you drive your car much these are a must

[moparstuart]

 

[The70RT]

   

[GULFGLENY]

Awesome!

[thedodgeboys]

if you drive your car much these are a must

Only if you drink and drive Stuart...

Now she won't be piddling at the shows 

[nvrbdn]

looking great stu. fun winter add on projects.

[pettybird]

you'll have to report on the 1" bars--you had .88's, Hemis are .92's, and I have .96's in the B5 car.  I'm thinking you MAY need new shocks like the RST Bilsteins...