DOES ANYONE HAVE AN EXTRA DECKLID FOR ME ?????

[daytonalo]

A NEED A VERY CLEAN 68-70 CHARGER DECKLID , ANYBODY ? MY CAR IS GOING TO PAINT IN 1 MONTH !

[Drache]

I thought you were selling it to get a boat? 

[daytonalo]

No , once I sell my home , hopefully soon , I will buy a new boat .

Larry

[raybeez]

check charger specialties...


http://www.chargerspecialties.com/catalog.htm

[daytonalo]

Nobody makes a new deck lid

[68chrgrwife]

check e-scam (e-bay)...you could probably find one there....

[daytonalo]

I was hoping to find it here

[terrible one]

http://cgi.ebay.com/ebaymotors/1968-dodge-charger-trunk-lid-rare-mopar_W0QQitemZ250152098909QQihZ015QQcategoryZ140715QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

There's you one for a good deal. Keep in mind how rare they are!

[daytonalo]

Got burned too many times on E-bay ! I'm most concerned about the rear folded over edge! It cant have any rust in that area !

Larry

[TomP]

Got burned too many times on E-bay ! I'm most concerned about the rear folded over edge! It cant have any rust in that area !

Larry

I've got one sitting in the bed of my Li'l Red Express, but it has a dent in the trailing edge.  Let me get my other truck unpacked (just got back from Montana) and I'll PM you a pic.

[daytonalo]

Thanks

[BigBlockSam]

 

[moparstuart]

 it has that rear rust option also it should sell high

[nascarxx29]

I have 1 in one not sure what year it is.70-s have the go wing cut outs.68s and 69s dont.It was my daytonas spare I picked up 20 years ago because the daytona one had the common lower edge rot.Monday I can go to my storage get it for pics.Should be alot nicer than that ebay buy it now one for $399.00

[472 R/T SE]

Don't mean to nitpick, but the go wing was a '70 midyear option so the inner cut-outs weren't present until later on in the model year in case you find a '69 year built '70.

[daytonalo]

no offense taken , I don't care about that kind of stuff , I just want my Hemi Daytona done ! Could care less about  what car came with a ribbed hood or not ! I don't play with models and pictures . I just want my car done before I wear a diaper !

Larry

[BigBlockSam]

I just want my car done before I wear a diaper !

 

ya old bitch . 

[nascarxx29]

This one im sure is off a 70 charger as its plum crazy.And as mentioned no cut outs.I got it for that reason it was right for the daytona underskin no cut outs
http://i20.photobucket.com/albums/b229/Annie75414/100_4060.jpg
http://i20.photobucket.com/albums/b229/Annie75414/100_4061.jpg
http://i20.photobucket.com/albums/b229/Annie75414/100_4062.jpg
http://i20.photobucket.com/albums/b229/Annie75414/100_4063.jpg
http://i20.photobucket.com/albums/b229/Annie75414/100_4066.jpg

http://cgi.ebay.com/ebaymotors/1968-dodge-charger-trunk-lid-rare-mopar_W0QQitemZ250152098909QQihZ015QQcategoryZ140715QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[The70RT]

With NO rust?..good luck

[gtx6970]

Nobody makes a new deck lid

Not, YET

[TomP]

Here's the spare I have..  You be the judge...


It has two small dents along the upper trailing edge and a little bit of surface rust on the underside, but nothing that naval jelly or any other rust killer won't take care of.

[BigBlockSam]

hell yea . thats a good one

[TomP]

hell yea . thats a good one

I've got 2 others that are perfect, but he said extra.  Those 2 are going on my 2 '70 Chargers.

  Anybody know where I can find a Vega hatch cheap?

[BigBlockSam]

it took me about 6 months to find a hatch. there rare in the northeast . Rene

[nascarxx29]

The last vega hatch I found .I got for daytonalo.$75-80.The junkyards around here are thin.The trunklid I had I got in the 80s and sort of lost track of it a storage garage I use.And when daytonalo posted for a trunklid .I think I had  a lid somewhere.If you could find one in our yards.It be pretty rusty