Interior Trim Panel help!!!

[MadScientist]

Hi all,

Im putting the finishing touches on the car 70-500 and am having trouble re-installing the rear trim panel (where the armrest is).  there are 3 pieces: the panel, a stainless trim piece and the upper pad.  If anyone can explain how these go on and in what order it would be a great help.  Im mostly having issues with how to get the stainless trim in there aboe the panel.

Thanks

MS

[RAWPWR]

stainless first because the screws get covered by the lower panel
upper pad 2nd or 3rd
lower panel 2nd or 3rd

just have the correct clips and install the rear seat before installing the arm rest

[MadScientist]

Thanks!  After a good nights rest, I figured out there is a cap-end on the end of the stainless piece that doesnt allow you to come in from an angle from the front of the car.  If I come in straight up or slightly from the rear, it fits perfectly in there!  Sometimes I cant see things if they are on the end of my nose!

Thanks

MS

[RAWPWR]

I have the same trouble..good luck