What choke assembly do I need for my TQ..........

[bandit67]

Guys, I put a stock speadbore intake that has a casting date of 71 on my 360.  I have a 73 TQ that I just reworked and have placed on the 360.  I went searching today at my local yocal auto parts houses   for a stock choke assembly for a 71 340 with TQ. NOBODY had anything that looked like it might work. They had plenty of one barrel and two barrel  Holley and Carter stuff , but no four barrel.  Am  I asking for the right thing..........will something in a later year model work..........surely they are still be made.  Any comments  as to where I am gong wrong..........thanks........J

[Nacho-RT74]

http://cgi.ebay.com/ebaymotors/NOS-MOPAR-1971-1973-Chrysler-Dodge-Ply-choke-assy_W0QQitemZ110054006561QQihZ001QQcategoryZ34198QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

or

http://cgi.ebay.com/ebaymotors/dodge-chysler-plymouth-V8-choke-383-440-360-318-mopar_W0QQitemZ300108323016QQihZ020QQcategoryZ33552QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

my 400 uses the lower one

wow... down here are pirced around $5-10

[Nacho-RT74]

also found this what is EXACTLY the one my car does have
http://cgi.ebay.com/ebaymotors/1974-76-chrysler-dodge-plymouth-new-choke-assm_W0QQcmdZViewItemQQcategoryZ10076QQihZ020QQitemZ4609523668QQrdZ1

my asembly is also TQ...

[Nacho-RT74]

http://cgi.ebay.com/ebaymotors/Mopar-NOS-Carb-Choke-2bbl-8Cyl-74-79-Dodge-Trks_W0QQcmdZViewItemQQcategoryZ33552QQihZ019QQitemZ7999165094QQrdZ1

http://cgi.ebay.com/ebaymotors/Mopar-NOS-Carb-Elec-Choke-2bbl-8Cyl-74-77-Dodge-Trks_W0QQcmdZViewItemQQcategoryZ33552QQihZ019QQitemZ7999163867QQrdZ1

http://cgi.ebay.com/ebaymotors/Choke-Thermostat-Dodge-Truck-8-cyl-1974-75-76_W0QQcmdZViewItemQQcategoryZ34198QQihZ008QQitemZ180035157900QQrdZ1

etc...
let me see how is your manifold enclosure

[Nacho-RT74]

and this is the electrical assistant control unit, single stage for /6 and SB ( BB is double stage with a ballast attached )
http://cgi.ebay.com/ebaymotors/1973-1974-Choke-NOS-MoPar-Runner-Cuda-Challenger-Dart_W0QQcmdZViewItemQQcategoryZ33552QQihZ004QQitemZ140080842125QQrdZ1

[bandit67]

Thanks for the listings, Nacho, but none of those looks like they will fit my intake.  The little silver cup holder looks like one I have seen on a 318 two barrel. Does the same assembly work for both 2 and 4 barrel carbs.  Should I be looking for a electric choke instead of one with a choke thermostat coil?    thanks........J

[Nacho-RT74]

TQs are all manifold chokes.

Let me see your manifold choke location and will check

[71charger_fan]

Check the applications for early '80s Dodge trucks with 360 four barrels. That's what the one in my Charger was for; it's not electric.