Front end alignment values..

[T16]

Anyone here that can give me some front end values for my 72´..?

..or tell me were I can find them.. would be great

[keepat]

For power steering

Caster angle, Degrees      limits  -1/16 to +1 5/16   Desired  +5/8

Camber angle, Degrees    limits left +1/8 to +7/8   Desired  +1/2        limits right +1/8 to +5/8  Desired  +1/4

Toe-in inch  1/8

Hope this helps!
Pat

[T16]

Ok.. thanks

[375instroke]

The factory specs suck, and I think they were for bias ply tires.  I would never run positive camber.  Get the most caster you can.  Many people try for 3 deg. positive.  Set camber at 1/2 to 1 deg negative, and 1/16" for toe-in should be good if the bushings aren't worn.