upper control arm bushing help

[73chargers4404]

upper control arm bushing help,i have a 30 ton press but am not sure how to press in the upper control arm bushings dont know how to get the shaft pressed in ,i was thinking i could press in one bushing and then slide the shaft through the side with no bushing and press in the shaft in one side then press the bushing on the shaft on the other side.thanks 

[moparguy01]

when you press them in you have to slide the kingpin in first, then put one bushing over the top of the kingpin and line it up, then do the same on the other side, this keeps the bushings centered, then press in one side, install the nut and washer, then do the other.

its easier to do than to describe how to do it.