News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Headliner trim question

Started by chargercraig, July 12, 2007, 05:11:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chargercraig

July 12, 2007, 05:11:04 PM
At the front where the headliner meets the windsheild there is some trim. It seems the guy who installed my headliner did not properly install the clips/retainers that the trim screws into. Does anyone know how to properly install those clips (pics or diagram would be great)?

MadScientist

#1
July 17, 2007, 12:10:36 AM
The clips punch through the headliner and then have slots for the trim screws (on the other side)to go through.  There are six of them.  Cant find the pics rigth now or Id send em


MS

chargercraig

#2
July 18, 2007, 12:48:13 AM
the problem is i punch them through the haedliner but they don't stay up. any idea's

bill440rt

#3
July 18, 2007, 08:10:14 AM
You have to spread the little tabs that go thru the headliner into the roof. Take a small pair of pliers to squeeze it on the other side once they are in, that will spread the tabs out.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce
Print
Go Up Pages1
User actions