does anyone have one of these....

[Bandit72]

...or know where i can buy one? I need it to change out the rear brakes on my 62 pickup

http://www.ch300imp.com/brakedrum_removal.htm

Later

[terrible one]

I'll bet your local Autozone has one that you can rent for free.

[Charger_Fan]

I'll bet your local Autozone has one that you can rent for free.

I don't know about that. That tool's been outdated for at least 30 years. It wouldn't hurt to check though, I guess.
I have one like the one in the pic with the blue brake drum. If you don't have any luck finding one locally, I'll let ya borrow mine. Just pay for shipping & promise to return it, ok?

[John_Kunkel]

Most equipment rental yards will have a good heavy duty drum puller, if not check out this one:

http://cgi.ebay.com/ebaymotors/Universal-Wheel-Hub-Puller-Rear-Brake-Drum-Remover-Tool_W0QQitemZ250141574072QQihZ015QQcategoryZ35625QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Don't try to remove the drums with anything lighter duty than that.

[Drache]

I know Canadian Tire had one where I worked in their tool lending program.

[Argos_Chargers]

When I went to pull the drums off a '64 Dart no one in town had one.  I finally was able to borrow one from an old mechanic that used to use it on his Studebaker.  I did pick up a nice on e on e-bay.  Brand new, last year.  They can be found out there, but they're just not a high demand item.

[Big Lebowski]

  I would think the nearest brake shop would have one to loan you. All of my '62-'64 buddys just put in the '65 & up axle & 11"drums.