News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Cometic Head Gasket

Started by 69Chrgr, June 29, 2007, 07:09:36 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

69Chrgr

June 29, 2007, 07:09:36 AM
Hey guys, I ended up installing my eddy heads on my Magnum 360/408 and forgot to install the roller lifters. Then I discovered they wouldn't fit without removing the heads. Problem is, I already torqued them down with the cometic head gaskets. I called Indy, (place I bought them from) and they said as long as I didn't run the engine, I'd be o.k. What do ya'll think? These are custom shimmed MLS cometics. :brickwall:

firefighter3931

#1
June 29, 2007, 12:11:54 PM
No problem.....just retorque them in the proper sequence and you're good to go.  :yesnod:

Some guys even reuse them (Cometics) after the engine has been run.... without issue.  ;)



Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs
Print
Go Up Pages1
User actions