can OEM bulk head connector ends still be bought?

[troy.70R/T]

Does anybody know where to buy just the female metal ends that go inside the bulk head as well as the male ends? Where do they get them to make new wiring harnesses? I get tired, as I'm sure many of you do of having to spent hundreds of dollars on new wiring harnesses when some of my old ones could be easily fixed. thanks     charger.seventy@yahoo.com

[Nacho-RT74]

chargerspecialties, year one, Paddock...

I find those down here ( Venezuela ) on hardware stores too.

I make by myself the harnesses too.

[Ghoste]

You might even find them in a bulk at a decent auto parts store if you have one around.  Now if you find someone that has the plastic housings for the bulkhead connectors, that would be a must share bit of info.

[Nacho-RT74]

You might even find them in a bulk at a decent auto parts store if you have one around.  Now if you find someone that has the plastic housings for the bulkhead connectors, that would be a must share bit of info.

the plastic plugs are available now on same dealers I posted ( except headlight 3rd gens harness one )

[Ghoste]

For the bulkhead connector?  Must be a new item, I'm not seeing it in their catalogs, or I'm not looking in the right spot.

[histoy]

I had the wires in my bulkhead melt, and it ruined the bulkhead.   I was able to get the male and female wire connections at NAPA.  Fortunately, I had a spare bulkhead from an old wiring harness.

[Charger1970]

I bought a new bulkhead connector (from Mitchell Motor Parts) and new wiring harness connectors (from Evans) and replaced quite a few of the terminal ends both inside the car and under the hood.

I got the terminal ends from http://www.waytekwire.com/. They sell all things electrical but you have to pay a surcharge for a "small" order.
Electrical problem SUCK. Hope this helps. 

[SUPERBEE123]

au-ve-co products out of cold springs,ky. sells male and female terms for 50 pieces for under ten dollars. they also sell a 14-20 gauge double D crimp tool to crimp those ends just like the factory ends. the tools is very pricey but the crimps look just like the factory ones. hope this helps.

[Chatt69chgr]

I also got the male and female pins for the bulkhead connector at NAPA.

[Nacho-RT74]

For the bulkhead connector?  Must be a new item, I'm not seeing it in their catalogs, or I'm not looking in the right spot.

actually is not on catalogs, just on line... maybe will be included on next year printed catalog.
http://www.yearone.com/serverfiles/headline.asp?hid=112AB73636
http://www.paddockparts.com/Paddock/product_family.asp?family%5Fid=3510&gift=False&0=dept%2Easp%2Cdept%5Fid%3D4%26menu%5Fid%3D%26Tree%3D%2CDodge%2FPlymouth&1=dept%2Easp%2Cdept%5Fid%3D70%26menu%5Fid%3D%26Tree%3D0%2CDodge%2FPlymouth%20Electrical&mscssid=00494153DDD644FA4B1BBDCC91A57A26
http://www.chargerspecialties.com/catalog.htm ( scroll down and check on wiring repairs section )

for terminals packages:
http://www.paddockparts.com/Paddock/product_family.asp?family%5Fid=6654&gift=False&0=dept%2Easp%2Cdept%5Fid%3D4%26menu%5Fid%3D%26Tree%3D%2CDodge%2FPlymouth&1=dept%2Easp%2Cdept%5Fid%3D70%26menu%5Fid%3D%26Tree%3D0%2CDodge%2FPlymouth%20Electrical&mscssid=00494153DDD644FA4B1BBDCC91A57A26

[MTPOCKET]

Go here he has them 50 cents each.   

BlkHdTermF Electrical Terminal 10 $0.50 $5.00

BlkHdTermM Electrical Terminal 10 $0.50 $5.00

[troy.70R/T]

Thanks to everybody for your response. You have saved me a lot of time, money and agrivation. Troy