68 charger 1/4 glass bolt question

[1st_charger]

Are there special bolts to hold the glass to the bracket? I have the gaskets.

[BLK 68 R/T]

Yes, they are a 1/4" x 20 IIRC and have a large concave shaped washer on them.

http://www.dodgecharger.com/forum/index.php/topic,98556.0.html

[gtx6970]

only thing special about them is the size of the washer. its maybe 1.25" dia.
Bolt is as mentioned 1/4-20 thread maybe 3/4" or 1" length tops

You can achieve the same thing with a standard bolt with a fender washer under it

The original bolts have a pilot point but you can get away without it

[B5 Charger]

I may have some of those parts if you need them.  Would have to dig through my hardware bucket to make sure.

[1st_charger]

Thanks for the help I got the bolts and the glass is in now just to get it adjusted! Hopefully the linked thread above helps with that! Thanks again