Show me your engine and car dolly system

[hemi68charger]

Hey gang...
Looking to build a dolly system for my '68 Charger to support it while the suspension isn't on it. Also, a dolly for the engine/k-member/tranny all-in-one to build upon prior to body mating. The gist of what I'm looking for is in these two pictures.... One for the body and another for the engine/tranny combo....

Cheers,
Troy

[Magnumcharger]

http://www.dodgecharger.com/forum/index.php/topic,29964.0.html

http://www.dodgecharger.com/forum/index.php/topic,29148.0.html

[hemi68charger]

Great links.. I saw the first one and it didn't really meet my spec's for the front of the car, but Kori's link is great !!!!  I forgot about those pictures..

Troy

[Charger-Bodie]

here is a few of ours they work nice .

[hutch]

you pros piss me off with all your cool toys.  I need to go buy some lotto tickets or something.
  just kidding. that is some rocking setup you guys have.

[41husk]

Forgett the set ups, sweet cars!!

[hemi68charger]

Thanks guys for the ideas...........  I'm going to buy the casters today.. Get 4 swivel with about 500 lbs load per with brake. Also, getting two with the swivel lock as well so it'll be easier for me to maneuver by myself.  Like the 4 swivel function with lock since it'll enable me to pivot the car in a circle in the middle of my garage...

I also want the forward attach point to use the bumper brackets and protrude forward away from the k-member mounting points so I can lower the car unto the engine/tranny/suspension assembly...
Because it will protrude forward, I can use the crossmember of the forward dolly unit as a lift point....

Troy

[dodgecharger-fan]

This one isn't mine, but I like the idea behind it. http://www.crazyeightlift.com/
Be patient with the site - sometimes it's a bit of a sloth.