News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Rear wheel lock up during hard braking

Started by Paul G, June 10, 2007, 03:04:07 PM

Previous topic - Next topic

Paul G

This clown turns left right in front of me the other day. I hit the brakes pretty hard and the rear wheels locked up. This happened before, but since I rarely hit the brakes that hard it never really mattered. Those 295/50's I have on the back put out a pretty loud bark. But, is there a way to apply more braking force to the front wheels, or less to the rear?
1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

John_Kunkel


Are the brakes stock? Discs? Drums all around?

If it is stock and has discs on the front you might have a faulty proportioning valve. The purpose of the prop valve is to cut back the pressure to the rears on heavy braking.
Pardon me but my karma just ran over your dogma.

Paul G

Quote from: John_Kunkel on June 10, 2007, 03:34:54 PM

Are the brakes stock? Discs? Drums all around?

If it is stock and has discs on the front you might have a faulty proportioning valve. The purpose of the prop valve is to cut back the pressure to the rears on heavy braking.

They are stock front disc rear drum. Any way to test or adjust the proportioning valve?
1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

resq302

I had this problem once with my 69 Charger.  Turns out the rear axle seal was leaking and contaminating the brake shoes.  Suprisingly enough, the gear oil on the brake shoe lining made it catch and lock up as opposed to lubricating it and not making it catch.  Might want to pull the drum and see what you have back there.  I have also heard that sometimes the automatic brake adjuster sometimes jumps and keeps adjusting the brakes when it shouldnt be.
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

six-tee-nine

 :iagree:

Greasy brake pads make your brakes lock very easy
Greetings from Belgium, the beer country

NOS is nice, turbo's are neat, but when it comes to Mopars, there's no need to cheat...


bordin34

I think it came like that from the factory. My 74 does that also. I also read a review from 1974 and it said that on every hard brake thing they did the rears locked up and they even spun around in one of the times.

1973 SE Brougham Black 4̶0̶0̶  440 Auto.
1967 Coronet Black 440 Auto
1974 SE Brougham Blue 318 Auto- Sold to a guy in Croatia
1974 Valiant Green 318 Auto - Sold to a guy in Louisiana
Mahwah,NJ

Ghoste

The factory proportioning valves were an approximate at best.  One valve was used in a wide variety of dissimilar applications.  Weight and wheelbase are two very important factors is setting up the brake proportioning and a valve that is calibrated for a fully loaded Newport station wagon would be completely wrong for a stripped down Belvedere with a smallblock for example.

Paul G

I rebuilt the rear brakes last summer. No leaks. Shoes and springs are new. I recall having this problem with several other old Mopars in the past. Is there anything I can do to adjust the brake force to the rear?
1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

Ghoste

Remove the factory unit and put in an adjustable proportioning valve.

Paul G

1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

Ghoste


Nacho-RT74

really, stock pieces are enough.

about different prop valves to different bodies.. is true but not a BIG difference... I think You could just change the prop valve spring inside valve to get better rear/front brakes relationship. however dunno if sof or harder spring what would it be the result. is Just an idea.

As I stated on the other thread, once I got similar experience and was the emergency brake link inside the assembly somehow stuck against the brake shoe.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

sean68charger

Quote from: Ghoste on June 11, 2007, 09:15:07 PM
Remove the factory unit and put in an adjustable proportioning valve.
yep. i had the same problem when going to wider rear tyres-this is probably why the rear breakes away first as your changing the factory settings, fitting the adjustable valve is the way to go
68 Charger 440 R/T<br />Burnout Bandit!!!

Paul G

Quote from: sean68charger on June 12, 2007, 05:07:55 PM
Quote from: Ghoste on June 11, 2007, 09:15:07 PM
Remove the factory unit and put in an adjustable proportioning valve.
yep. i had the same problem when going to wider rear tyres-this is probably why the rear breakes away first as your changing the factory settings, fitting the adjustable valve is the way to go

How did you install it? Any pics?
1972 Charger Topper Special, 360ci, 46RH OD trans, 8 3/4 sure grip with 3.91 gear, 14.93@92 mph.
1973 Charger Rallye, 4 speed, muscle rat. Whatever engine right now?

Mopars Unlimited of Arizona

http://www.moparsaz.com/#

daytonalo

EASY ONE , RESET PROP VALVE, PUSH IN THE BRAS PIN ON VALVE . HAD THE PROBLEM YEARS AGO !

sean68charger

Quote from: Paul G on June 12, 2007, 05:12:36 PM
Quote from: sean68charger on June 12, 2007, 05:07:55 PM
Quote from: Ghoste on June 11, 2007, 09:15:07 PM
Remove the factory unit and put in an adjustable proportioning valve.
yep. i had the same problem when going to wider rear tyres-this is probably why the rear breakes away first as your changing the factory settings, fitting the adjustable valve is the way to go

How did you install it? Any pics?

installed instead of the original valve with the knob facing downwards, screwed to the chassis rail. its easy to adjust then. will try to get some pics for ya
68 Charger 440 R/T<br />Burnout Bandit!!!

Steve P.

Before you do anything else, pull both rear drums and check for rear end  and brake fluid leaks. Both will make your brakes grab. 

Also keep in mind that the wider you go with tires the less PSI you have across the tire width. In other words the wider the tire the less friction pressure you are putting to the ground.


Steve P.
Holiday, Florida

T16

I,ve got this problem on my 72 to.. but only on the pass. side. That wheel is the first to lock up  :-\

Steve P.

Quote from: T16 on August 21, 2007, 02:47:26 PM
I,ve got this problem on my 72 to.. but only on the pass. side. That wheel is the first to lock up  :-\


Very often you will find that a wheel cylinder is rusty and NOT working. Let's say the pass. side is rusted and not moving. This will make all the fluid going to the rear brakes go only to the Drivers side since the pass. side cannot move. In this case the drivers side will lock up.

Allllllways change both front or rear calipers, hoses and or wheel cylinders in pairs. Alllllways bleed the shit out of the system while doing so..
Steve P.
Holiday, Florida

T16

Quote from: Steve P. on August 21, 2007, 03:50:22 PM
Quote from: T16 on August 21, 2007, 02:47:26 PM
I,ve got this problem on my 72 to.. but only on the pass. side. That wheel is the first to lock up  :-\


Very often you will find that a wheel cylinder is rusty and NOT working. Let's say the pass. side is rusted and not moving. This will make all the fluid going to the rear brakes go only to the Drivers side since the pass. side cannot move. In this case the drivers side will lock up.

Allllllways change both front or rear calipers, hoses and or wheel cylinders in pairs. Alllllways bleed the shit out of the system while doing so..

Wheel cylinders are new.. front pistons rebuilt.
New fluid and bleeded.. Only thing left to do is new rear shoes and maybe resurface the drums (one got som nasty grooves)

Steve P.

T-16,,, the rear wheel cylinders are fed evenly by a (Y) block. You need to check the lines from the (Y) to the cylinders for a kink or flat spot. This is just part of any good brake job.

Were the cylinders leaking when you changed them out?? Any time you leak fluid or gear oil onto your shoes I suggest changing the shoes and cutting the drums. I know many just clean the shoes up and get away with it, but if the fluid has soaked in you cannot get all of it cleaned off. Cleaned up shoes are not worth a collision to me. New every time..

If your drums do not measure close to the same after turning them I also feel they should be replaced. A thin drum can be heated quickly and cause all kinds of grabbing and pulling. Again, we are not talking about a throw away pile of crap. We are talking about a prized Mopar.. Not to mension your life or someone Else's..

A simple rule I live by.  If it doesn't start I won't get killed in it. If it doesn't stop I easily could..
Steve P.
Holiday, Florida

Charger-Bodie

Quote from: Steve P. on August 21, 2007, 06:56:18 PM
T-16,,, the rear wheel cylinders are fed evenly by a (Y) block. You need to check the lines from the (Y) to the cylinders for a kink or flat spot. This is just part of any good brake job.

Were the cylinders leaking when you changed them out?? Any time you leak fluid or gear oil onto your shoes I suggest changing the shoes and cutting the drums. I know many just clean the shoes up and get away with it, but if the fluid has soaked in you cannot get all of it cleaned off. Cleaned up shoes are not worth a collision to me. New every time..

If your drums do not measure close to the same after turning them I also feel they should be replaced. A thin drum can be heated quickly and cause all kinds of grabbing and pulling. Again, we are not talking about a throw away pile of crap. We are talking about a prized Mopar.. Not to mension your life or someone Else's..

A simple rule I live by.  If it doesn't start I won't get killed in it. If it doesn't stop I easily could..

well said !!
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

resq302

Something else to think about..... are your rear shoes equally adjusted?  If they are not, one might be grabbing before the other as it might be closer to the drum versus the other side.
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

is_it_EVER_done?

I agree with the others that the first things to check are brake lining contamination, adjustment, and add an adjustable proportioning valve, but understand that under hard braking, drums will always lock up at some point. This is why new cars have rear disks instead of drums.

The design of drums will cause them to "cam" lock at some pressure point no matter how tuned/adjusted the system is. This is usually not a problem, but with enough brake pressure, they will lock no matter how adjusted/balanced everything is, and do so without warning or change in modulation of the brake pedal.

Up until the point of lock-up, they will brake as well as disks if everything is in good condition, adjusted, and not over heated, but you need to make sure everything is in good working order.

T16

Come to think about it.. I had a leak from the axle seal at that side..

Soo i guess problem solved  ;)