Blinker Cancel not working

[LargerCharger383]

I bought my car with an aftermarket steering wheel, and recently replaced it with a stock one, but when I did, the blinkers stopped cancelling.  I found a picture of the back of another stock steerin wheel and see the piece that's missing on min, it's a small circular thing with two nubs that do the job. I'm wondering whether this part is available, what it's called, or if it's part of the frame, I can't tell... 

[Silver R/T]

a problem with your cancel cam, possibly need new one

[Charger1973]

a problem with your cancel cam, possibly need new one

Thats what it sounds like to me too. 

[tecmopar]

Turn signal cancellation cam.

[BrianShaughnessy]

I just attempted to fix mine with one of those $10 motormite turn signal cam repair kit deals when I changed my wheel last week.

If somebody has successfully used this crap please let me know... because I ended up stuck without any brake lights or turn signals after I actually tried it.

I'm waiting on the brown truck to drop off the new complete repro switch.      YO sells a new mopar switch but apparently it's made of gold since it's twice the price of the repro.   

[Bandit4142]

I also installed a new Grant wheel, lost signal cancel, and then installed a new Motormite kit...   First the Motormite Cam kit is a P.O.S...  no other way to describe it.   This also didn't fix my cancellation issue either.   I discovered there is a small metal ring that needed to be removed from the factory steering wheel and reused in the Grant kit.  I installed the missing ring, and the signal cancel worked for about..... one drive to work (3 blocks).   All I can guess is the metal ring slipped out of position or something, but I haven't tore it back apart to see yet.   When I take it apart, I'll take a pic of the ring and show everyone what I'm talking about.  Its basically a small ring that has a "ear" on it that trips the cam for the signal cancel to work.   All I can figure is that the ear has slipped out of position at the moment.   

[Nacho-RT74]

My tuff wheel adaptor does have a snap ring with an extended arm that meets with cancel cam to make it works... maybe that's your problem ?

[BrianShaughnessy]

I replaced the whole switch and harness last nite.   Didn't  go anywhere yet tho.   I know my turn signals work again and so do my brake lights.

Gotta pull the wheel and take apart the colmn far enough to get  to the wiring.    Then since I don't the proper tool to remove the leads from the connector housing that has to be saved and reused... well I cut the harness and hacked up the old terminals to free them from the connector.

So... a couple hours more or less and $70 for the repro switch deal.   

[BrianShaughnessy]

Update...  went for a ride... works good. 

Ebay auction for the switch I got (67-69 style) http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&item=270124224987