News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Painless Wiring

Started by terrible one, January 21, 2007, 09:22:25 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 All
User actions

umcandprops

#50
May 19, 2007, 12:24:15 AM
Fired up the new painless harness today...soooo nice.
Headlights are nice and bright...brighter than Ive ever seen with a
stock harness. There a few things PP doesnt explain in the codebook..ie 4 speed wiring etc
but with a little work it wasnt too hard.

Rolling_Thunder

#51
May 31, 2007, 12:37:28 AM
Quote from: umcandprops on May 19, 2007, 12:24:15 AM
Fired up the new painless harness today...soooo nice.
Headlights are nice and bright...brighter than Ive ever seen with a
stock harness. There a few things PP doesnt explain in the codebook..ie 4 speed wiring etc
but with a little work it wasnt too hard.


4-speed wiring is not covered - however it is easy...    connect both of the reverse light wires to the switch on the tranny....        try to wire my transmission...      i have 9 wires going to mine...     reverse light switch (2 wires), neutral satety (2 wires), Electronis speedo sender (3 wires), and a VSS (2 wires)      :D
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip
Print
Go Up Pages 1 2 3 All
User actions