News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Urgent help : power steering coupling on end of column

Started by 71 Bee Man, May 26, 2007, 07:05:23 PM

Previous topic - Next topic

71 Bee Man

G'day guys,

just posting here because I need a quick answer if possible.

I have a 71 Charger with power steering. The little steering coupling where the column meets the connector on the steering box has never fit well, so I decided to get a kit with new seal, metal guides etc. I even pulled the column out and painted it all up.

Now, the guides never sat right inside the housing. Trouble is now that when I'm trying to reinstall the steering column, it's as though the thing needs another inch and a half on the end.

It's like the base plate that goes under the dash and secures the column is too protruded and won't allow the column to go in the full distance.

Am i doing something wrong. Like I said the metal hides that sit on the end of the column never quite sat in there in the first place, hence my wanting to tidy it up.

I'm going to keep trying but thought there may be a logical answer out there.

peter
Sydney, Australia.
Add your details to the Forum members List. Visit this thread to find out more :
http://www.dodgecharger.com/forum/index.php/topic,21133.240.html

resq302

posted a reply on this topic in the general section.  hope that is your problem.  you can temporarily pull it out but I would get it repaired so it does not walk its way into the column again.  That would be a very bad thing especially if you were driving it when it happened.
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto