Does anyone sell 3rd gen Vynil top trim?

[41husk]

I need the pot metal corners for a 73 Charger with a halo top.  Does anyone repop these?  Is there a source?  I put an add in the parts wanted but got no response.

[Nacho-RT74]

Do you mean rear corners below rear windshield ?

just used, no repro.

71/74 are all the same as far I know... or at least interchangeable. The ones mounted on my car are from 71 because when I removed mines stud got broken.

[41husk]

No, Im talking about the pot metal pieces on the halo top the one piece is fastened into the quarter with a screw and the other has a pin held on with a speed nut from the trunk.

[Nacho-RT74]

[CDN72SE]

I
Like this?

http://cgi.ebay.com/ebaymotors/1973-74-Dodge-Charger-SE-Vinyl-Top-Trim-Mopar-NICE_W0QQitemZ190112754402QQihZ009QQcategoryZ33654QQrdZ1QQcmdZViewItem
and
http://cgi.ebay.com/ebaymotors/73-Dodge-Charger-SE-Vinyl-Roof-Trim_W0QQitemZ170111103042QQihZ007QQcategoryZ33654QQrdZ1QQcmdZViewItem

[Nacho-RT74]

No, that is 73/74 SE. He is talking about HALO top, used on hardtops

[hemihead]

I think he may be talking about the " Boomerangs" around the 1/4 windows on the hardtops.

[Charger1973]

This peice?

[Nacho-RT74]

this is my guess

[hemihead]

Yeah that could be. 

[41husk]

this is my guess

yes and the othe pot metal corner just under the rear window.  Thanks does anyone make or have a set they could spare?

[Nacho-RT74]

just used buddy.

[ACUDANUT]

  That's not a Halo top is it ??  That looks like a full top.  I thought the Halo top and the half-tops are the same thing

[Charger1973]

The half top you are thinking of is what they called the canopy top. 

This is the halo top because it makes a "halo" around the top of the car (doesnt come all the way to the drip rails).

[41husk]

You don't have any used pieces, Natcho?

[Nacho-RT74]

I think so, but broken studs. That was the reason why I replaced

[hemihead]

That might be a hard piece to find. I don't think many Halo tops were made.