Will 17"rims work on a 1969 charger???

[bull]

Very nice ride man... but then I'm partial to black Chargers with red stripes.

Thanks Mike. . . Those are the same wheels you have, same size too.

Tim

I thought that was Mike's car at first until I realized it was a '69.

[440charger68]

isn't there a thread on this?

[badack]

Tim,

Well I ended up going old school and bought 15" rims 275/50/15 and 245/60/15 with 5" offset in the rear. they fit well, fronts rub a little on the fender but I'm not happy. I want your look exactly. Will you let me know the specs you went with plus what you would have went with to get that fattest rear tire. Can you suggest the best place to shop fro a price too? Finally, how did you lower the rear? thanks steve

[chargerboy69]

Steve,

I sold the black car you see above several months back. I have another Charger I am just finishing up (pictures coming soon) with just about the same wheel and tire set up on my black car. The new wheels on my new Charger are Boyd Coddingtons with Nitto 555R tires.

Fronts are 17X8 with 4.5" backspace with a 245 45 17 tire.

Rears are 18X10 with 5.5" backspace with a 295 45 18 tire.

Best prices by far to buy the wheels is Rons Rims.   http://www.ronsrims1.com/Ron%27s%20Rims/Welcome.html

I searched everywhere for the best wheel prices, and I found Rons was by far the cheepest. I have purchased 3 sets of Boyds from Ron and his service is great. As far as tires I bought mine off of E-Bay. Tires get pricey, so I just watch E-Bay. My rears I just purchased off E-Bay are brand new and the guy never had them mounted, still has the stickers on them. I saved almost $300.00 buying them from him verses Discount Tire or Tire Barn.

As far as lowering the car, in the picture above, the car was lowered 2", which I felt was to much. I switched that out to 1 1/2" the next day. I used lowering blocks to do that. Bought a universal kit from Autozone for $19.99. Worked perfect. Below is my old black car with a 1 1/2" lowering block kit. If you need anything else just ask.

Take care.

Tim

[badack]

Tim,

Thanks for your speedy reply. Let me get your opinion...Ron's has 17x8 in stock but 18x10 is special order and of course an upcharge and 3 weeks lead time. With 17s do you think I'll need 5.5 bs in the rear? Also do you think it will be a bid compromise over the 18's?


steve

[chargerboy69]

Steve,

If you went with a 17X8 wheel in the rear you want a 4 to 4.5" backspace. If you went with a 17X10 in the rear I would go with 5.5". I would get the 18X10, but that is just my opinion. Of course alot depends on your budget too. For me, wheels can make or break the cars looks, so I spent a little extra.

A three week build time is not to bad. If you are looking at Boyds they really are a quality wheel, and well  worth the wait. The less common wheels like mine are custom made to order and I believe mine took about 4 to 6weeks to arrive.

Tim

[471_Magnum]

255-50-17 on 17x8 4.5 BS + 275-50-17 on 17x9.5 5.25 BS

Fronts were real tight. I'd go smaller next time.

[badack]

Those must be Boyd's Magnetos on the black 69 right? I priced out ttII's earlier but those are a little more unique. I also liked the sultan. I'll price them tomorrow.

[HITMAN 149]

nope.... they are shrikes....
these are magneato's... which are one of my wheel choices..

[badack]

Really? On Tim's black 69? They look like Magnetos...who makes shrikes?
steve

[HITMAN 149]

i have had many a conversation w/ tim...
they are the same wheels that NYC MIKE has on mr angry... BOYD shrikes.....

[MSRacing89]

i have had many a conversation w/ tim...
they are the same wheels that NYC MIKE has on mr angry... BOYD shrikes.....

Wrong.....they are not "shrikes".  They were ordered as "rallyes".

[badack]

I'm confused. On the Boyd website there are no "shrikes" or "ralleyes" so either the name has changed or...Also Tim, I found a package will you check it out;

Boyd Magnetos
17x8   4 1/2 BS
18x10 5 1/2 BS

Falcons

245/45/17
295/40/18 (they said 40's would fit better than 50s)

$2,050.

steve

[chargerboy69]

i have had many a conversation w/ tim...
they are the same wheels that NYC MIKE has on mr angry... BOYD shrikes.....

John is correct. I do run Shrikes. Hey John, How are things? I had them on my black car and I bought another set for my white car. The set I bought for my white car are a little different then the black car. My new wheels have a smooth lip instead of the rolled, and the new ones are a 1/2 wider too.

As far as Mike, he told me they were Shrikes. MSRacing89 you built his car, so you would know, but that is what he told me. I do know that Mikes wheels look identical to mine. 

Steve, the Shrike wheels are not listed. You will have to special order them. They are around $400.00 each from Rons. Plus $1000.00 for the smooth lip added to the set. Some websites I checked on had them for $500.00 to $600.00 each wheel. That is not a bad price on the wheels you are looking at. The only thing I suggest is running Nitto tires instaed of Falkens. I ran Falkens on the black car and they did not get any traction.

Tim

[HITMAN 149]

hmmmm weird cause i have seeeeen them on the boyd website listed as shrikes?!?!?! i swear!!!! lol 

[badack]

Sorry guys- I called Boyds and found the Shrikes. Very similar to the Magnetos, maybe a little curvier so I just have to pick. I'm pricing up Nittos on your advice. wow, this is time consuming but worth it. Either way I think I got a good price as that number includes rims and tires!
Thanks and Thanks.

p.s. Id love to post a pic of my car but it is a hassle! I got the small resolution photo and now it says to rename the file-there is already a file by that name??? how the hell do you do that?

steve

[HITMAN 149]

hey steve..
right click on your photo in your computer... scroll down to where it sayns rename.. then rename kt somethng obscure, caus ethere are lile 54million photos on the site & they can't be named the same.
try that!?!?!?
good luck

[badack]

Here are the 15's.

[Blown70]

Here are the 15's.

NICE SHOP!

Ohh like the rims and tires but I do like the 18" look better....

Tom

[HITMAN 149]

wow!! yea nice shop!! ehhh and the car aint bad either!!!  lol

[chargerboy69]

wow!! yea nice shop!! ehhh and the car aint bad either!!!  lol

Yea your not bulls#!*in. That is a very nice shop.    Can I be your long lost brother?

I would not kick that car out of my garage either. 

Steve, here is a close up of one of my Shrike wheels for you.

[badack]

You guys are too much, thanks for the comments but more importantly the wheel input. Funny thing is I had to spruce the shop up to keep up with the car I put in it. Damn this car's expensive. I've got the 15"TTIIs for sale in the swap section if you know anyone-especially in the MA area.

[HITMAN 149]

hey tim...
how's things!?!?! hope all is well!!
they look soooo different off the car!! hahaha

[chargerboy69]

hey tim...
how's things!?!?! hope all is well!!
they look soooo different off the car!! hahaha

Things are going well over here.

Was suppossed to get sent to Ft. Sam Houston for six months of training a few weeks ago and the Army put it off due to my knees. Looks like I might be around for car show season. I am hoping. The wife sure is happy about that.

Your right they do look different. These wheels in the picture haven't even been on a car yet. I have them here in my den just looking at them.  I will probably get them on within the next couple weeks.