News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Correct trunk filler gasket for 68 charger?

Started by Corellian Corvette, May 10, 2007, 01:48:54 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Corellian Corvette

May 10, 2007, 01:48:54 AM
Can someone point me in the right direction of the correct filler gasket for a 68 charger. The one that's on there now I have no idea if it's correct - it's long and rectangular, and the vent tube goes through one end. However, it doesn't line up at all with the new trunk floors I installed.

The one I have sort of looks like this (this one is listed for 67-69 A-body (but again it doesn't really line-up with my trunk floor.



However, most of the repros I see are like this





Which one is correct? Thanks!

Just 6T9 CHGR

#1
May 10, 2007, 02:34:13 AM
The one in the middle looks correct to me.....
Chris' '69 Charger R/T

Rack

#2
May 10, 2007, 03:47:48 AM
Yeah I just pulled the filler tube out of my charger and the gasket looks just like the one in the middle.

Corellian Corvette

#3
May 10, 2007, 11:27:15 AM
Awesome! Thanks so much. So those are just secured with sheetmetal screws?

Hemidog

#4
May 10, 2007, 02:02:18 PM
mine was.
Print
Go Up Pages1
User actions