Where can I find this factory info?

[Chargerguy74]

Looking at the "Resto Topics" in the Mopar Action Magazines, they have a lot of "factory engineering drawings" for 3rd gen Chargers....like stripe/decal placement etc. I'd like to have this info for myself, is there a factory book out there that contains all this info? Thanks

Ryan

[Nacho-RT74]

will be nice, BUT isn't hard to locate the stripe on car. SIDEMARKERS are centered on the decal, and wheel opening will give you the rest

[Chargerguy74]

I wouldn't have any problems doing a side stripe, but they've had some awsome info on how to paint the hood treatments for each year, Correct over spray, etc. Figured it would be cool to have all the info...for everything.

[69hemi]

You might check out the nice people at Performance Car Graphics.  They have sheets with all their decals showing where and how were everything goes.

http://www.performancecargraphics.com/

[Chargerguy74]

Will check. But what did the factory put out that had this info in it. Is it just a parts book, service manual???

[Nacho-RT74]

Was usefull the info I send to you ?

[Chargerguy74]

you sent me info??? Recently?

I'm not looking for any specific info. I'm looking for all the info the factory/dealers had so I never have to worry.

[Ghoste]

Richard Ehrenberg at Mopar Action has some engineering and assembly drawings from the factory and that is where he draws that info.  It exists but it is exceptionally rare and not cheap.  Your best bet is to scour e-bay.  Good luck.

[cudaken]

 Ryan, my last Year One catalog had some preety good PIC of the strip placment. Not messurments expept for some hoods.

                               Cuda Ken

[Chargerguy74]

Ok thanks guys, I think I'll be sending Richard an email.

[Nacho-RT74]

you ask me on an email for slotted tail pipes, all reflective stripes and reverse warning light part numbers. I answered you

[Chargerguy74]

Very, very helpful stuff Nacho. I found the stripes, and bought them already. Thanks for the part numbers!!!