News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

intake install

Started by onebadmopar, May 07, 2007, 08:17:59 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

onebadmopar

May 07, 2007, 08:17:59 PM
hi everyone trying to install my intake tonight and imwondering the sealant (rtv that came with valley pan ..i know you put it on the ends allong the edge where the metal bars bolt thru and hold it down but what arroung the 8 ports anf the heat crossovers do any got there ?..and does anyone know the torqe specs for the intake bolts?

Rolling_Thunder

#1
May 07, 2007, 08:19:13 PM
I never use sealer on anything but the front and rear "china walls" -
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

onebadmopar

#2
May 07, 2007, 08:21:15 PM
china wals being the front edge and rear edge i assume .. it didint look like any sealer was around the ports on the old one but i figured i,d better check

Ghoste

#3
May 09, 2007, 06:13:06 PM
And you can use 40 ft lbs. for a torque spec on the intake bolts.
Print
Go Up Pages1
User actions