Lowering the front end...help

[bigeric73SE]

I have a 73 Charger and was wondering how to lower the front end maybe an inch or so.  If you have any info plz let me know...thanks
Eric

[Charger1973]

Turn the torsion bar bolt counterclockwise (one on each side), measuring both sides until they are where you want then, and make sure its even.  Get a front end alignment when youre done though. 

[hutch]

thats it?  how low can you take it? if you are looking at something real low do you need to find a custom spindle or something?

[Charger1973]

You can see how high the front end of my car was when I got it.  Im not sure why they had it raised up so high, I think maybe they thought the big block was going to weight it down more than it did.  Originally it was a 318 car and they dropped a 400 in it.  Anyway, I lowered it this way.  At first I did get it too low, and when I test drove it, it was obvious because the suspension would bottom out on itself over alot of the bumps.  I raised it back up to where its at now and it works just fine. 

[hutch]

thats good to know.  Thanks.