News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Aluminum CASE manual A833 4 speed -what is it from and worth ???

Started by GeneralLeeTESH, April 23, 2007, 09:09:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

GeneralLeeTESH

April 23, 2007, 09:09:30 PM
The Tag on RHS says PR833  6  9  82  and  C99-533  with an SS2 (below that). I bought this gear box for a spare 8 yrs ago for 200.00 from a guy in Charolette, North Carolina. His name is Lee Holman. He builds race cars.
Just wondering what car it was for and its worth nowadays. ???
The TESH

GeneralLeeTESH

#1
April 23, 2007, 09:28:36 PM
The Tailshaft is roughly 17.25 " long. The Input shaft Bearing retainer is 4.575
inches in diameter. The number on the RHS bottom is PP833  6 9 82.
Pictures below show it all, including the side numbers on the front LHS Aluminum case and the part number on the Front input shaft bearing retainer !
The TESH

Aero426

#2
April 23, 2007, 09:49:30 PM
Quote from: GeneralLeeTESH on April 23, 2007, 09:09:30 PM
The Tag on RHS says PR833  6  9  82  and  C99-533  with an SS2 (below that). I bought this gear box for a spare 8 yrs ago for 200.00 from a guy in Charolette, North Carolina. His name is Lee Holman. He builds race cars.
Just wondering what car it was for and its worth nowadays. ???

Lee's daddy built some real race cars.   :yesnod:

I'd have to take a guess and say this is something early 1980's truck related?   Chrysler did offer an aluminum case 833, essentially a 3-speed with a fourth overdrive gear.     

RD

#3
April 23, 2007, 10:46:46 PM
Quote from: GeneralLeeTESH on April 23, 2007, 09:28:36 PM
The Tailshaft is roughly 17.25 " long. The Input shaft Bearing retainer is 4.575
inches in diameter. The number on the RHS bottom is PP833  6 9 82.
Pictures below show it all, including the side numbers on the front LHS Aluminum case and the part number on the Front input shaft bearing retainer !

i thought the OD units front bearing retainer was supposed to be like 5.15 or 5.25" in diameter?
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

John_Kunkel

#4
April 24, 2007, 04:31:17 PM

The visible casting date and the stamped date pretty much make it an '82 unit which would definitely be an OD.

The front bearing retainer should measure 5.125" so someone has cut this one down to fit an earlier bellhousing but the 4.575" dimension isn't common to any of them. Early retainers measured either 4.35" or 4.80".
Pardon me but my karma just ran over your dogma.

GeneralLeeTESH

#5
April 26, 2007, 09:48:25 PM
John Kunkle...
HOW MUCH is an A833 4 speed 18 (input shaft) spline HEMI 4 speed  dated 1969 worth? ::) ??? :o
The TESH

Ghoste

#6
April 27, 2007, 10:15:48 AM
hehe  That depends on how badly the person restoring the 1969 Hemi car needs one.  :D :icon_smile_wink:
Print
Go Up Pages1
User actions