News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

belts width

Started by Nacho-RT74, April 20, 2007, 08:10:41 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Nacho-RT74

April 20, 2007, 08:10:41 PM
what's the belt width should be used on our engines ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

#1
April 21, 2007, 09:21:18 AM
Reason I'm asking is because unless dealer sold me wrong labeled belts, on Mopar catalog states My car uses 58" belts on Alt/compressor and I hardly could install 59"... maybe width was wrong ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

RD

#2
April 21, 2007, 09:41:11 PM
Quote from: Nacho-RT74 on April 20, 2007, 08:10:41 PM
what's the belt width should be used on our engines ?


width is 3/8", length is dependent upon a/c, idler/ ps/ type of alternator
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

Nacho-RT74

#3
April 22, 2007, 10:36:52 AM
Everything stock... just alt upgraded but for a newer Mopar one with same pulley, specs and size.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions