News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

SOLID Wing Installation on DUKETONA...

Started by GeneralLeeTESH, April 15, 2007, 09:29:45 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

GeneralLeeTESH

April 15, 2007, 09:29:45 AM
Built it Hell for Stout. Bushed all holes to support weight between Wing upright bases to inner Wing Washer plate-so virtually only 10% of the load is on the Rear quarter panel sheetmetal. The wing washers I built to support 89.3 # SOLID Gesdal Wing are 0.25 " thick. ;)
The TESH

AirborneSilva

#1
April 16, 2007, 11:40:29 AM
Looking good, looks like you put some thought into it too  :yesnod:

hotrod98

#2
April 16, 2007, 01:33:48 PM
Looks like you welded the wing braces together. Not a bad idea. Yet another reason for me not painting the braces that I sell. The first batch were painted, and some of the guys wanted them bare for powdercoat, so I reduced the price and quit painting them.
Can't wait to see the wing painted.


Normal is an illusion. What is normal for the spider is chaos for the fly.
Charles Addams
Print
Go Up Pages1
User actions