Trunk Hole for Gas Filler Tube

[mike337]

My 69 Charger's trunk floor has been completely replaced, and the original is long gone.  The problem is the hole to run the gas tank filler tube through the trunk floor has not been cut out.  Anyone have a pic of a Charger trunk with out the filler tube and seal in place, or some measurements as to the exact placement of the hole?  The new floor does have a stamped area where I believe the hole is cut, but I dont know how much of the area to cut out. 

Thanx,
Mike

[MorePwr]

looks to be a rectangular hole covered by a rubber boot. can't say I've ever looked that closely at it. I'll go get you a better pic and some measurements.

[mike337]

Thanx.  I just don't want to cut the new floor anymore than I have to, and want to keep the whole truck as watertight as possible.

Thanx,
Mike

[MorePwr]

the hole size on mine is 3.75" front to back and 5.125" left to right(looks to be factory). the left side of the hole lines up with the frame rail on the underside. the front to back position is centered on the raised pad. if you need a measurement, let me know a point to measure to. I'll be happy to help.

[MorePwr]

Thanx.  I just don't want to cut the new floor anymore than I have to, and want to keep the whole truck as watertight as possible.

Thanx,
Mike

I hear ya. measure 10 times cut once

[mike337]

Thanx for the info & the pics!

Mike