Inside door panels of 73 Charger

[Pouria]

Hello everybody;
I am not really sure if it is possible or not, but I decided to repair (or remake!) the door panels of my 73 Charger myself. I live in Iran, quite far, so despite the cost of the panels I need to pay a lot for the shipment. To do so your help is highly requested and appreciated. Does any body have the spread sheet drawing of the inside door panels of 73 Charger? If so, I can make it by metal sheet and wooden fiber myself and then cover it with sponge and high quality leather and sew the original patterns on them.

Thanks in advance - Pouria

[41husk]

natcho might ahve the drawings I have a set I could probably get measurements for you.

[Charger1973]

What model of car is it?  There are 2 different types of panels.

[Pouria]

natcho might ahve the drawings I have a set I could probably get measurements for you.

I would appreciate a lot if you do this great favor to me.

What model of car is it?  There are 2 different types of panels.

I do know how to say. Maybe the fender codes can help:
P31 = Power Windows
G37 = Left hand remote, Right hand manual outside mirrors / Chrome
H6L3 = Trim grade HIGH, Trim style Vinyl Bucket Seats, Trim color Parchment
HL2 = Upper door frame color

[Charger1973]

Do you have any pictures of the car?

[Pouria]

I can take pictures. Do you need the picture of the doors or the vehicle itself?

[Charger1973]

The rear quarter window area would tell what style panels it should have. 

[Nacho-RT74]

natcho might ahve the drawings I have a set I could probably get measurements for you.

Sorry, no...

What model of car is it?  There are 2 different types of panels.

actually there are 4:
hardtop ( or coupe ) Standart
hartdtop ( or coupe )  Brougham
SE Standart
SE Brougham

[Charger1973]

Yeah, but the actual shape there is 2 different styles, is what I meant.  After we figure out what panels he needs, then he can determine if he wants the brougham trim or not. 

[konigcharger]

the question is the rear window

does it look like this one?


or this one?

[Pouria]

Mine is similar to the second picture.

[41husk]

My set will be different it is an SE like the first picture,

[400/6/PAC]

I have a set that will match the second pic alredy off the car.
I'll take pics and measurments and post them.

[400/6/PAC]

Pouria
I dont know if this will help or not, but here we go.
Look at the first pic.
From the top left to the beginning of the curve 10-1/2 "
Fromthe back of the curve to the far right side 18-3/8 "
From the right top to the right bottom 10"
From the top left to the bottom left beginning of the curve 16"
Across the bottom is 19-1/2 "
I know this is not exactly what you asked for but its all I have.
Hope it helps you.

[400/6/PAC]

Sorry
The first pic is too big.
The second is the merror image of the first.

[73chargers4404]

hay konigcharger  do yo havw any more pictures of that chuck( OOPS CHICK  )with the car i had some but my computer bought it and they where lost my email is angelof_death79@yahoo.com

[Pouria]

Thanks indeed. The pics and the measurements are  great help for me. These panels seem to be the rear panels, do you have any pics of the front door panels too?

[400/6/PAC]

I think I do have the front panels.
I'll check when I get home later today.

[Nacho-RT74]

I have a complete set of RED panels and another BLUE set... Both sets to hardtop with crank hole, driver conditions that needs some touch ups like replace the cardboard on some of them, but NICE anyway

[Charger1973]

I have a complete set of RED panels and another BLUE set... Both sets to hardtop with crank hole, driver conditions that needs some touch ups like replace the cardboard on some of them, but NICE anyway

Id like to see the red ones.  Id really like to see an entire interior in red.  That sounds really interesting...   

[400/6/PAC]

Ok I got the front for you.
From the bottom left to the bottom right is 41-3/8"
from bottom left going up to start of curve is 6-1/4
from that curve to the top is 3-1/2
from bottom right going up to start of curve is 10-1/2
the top curve is 1-1/2
the lip over the door is 1"
The width from top right to top left is 38"
from top right to center of door lock is 6-3/8
I hope you can build what you need.
Good luck

[400/6/PAC]

Ok thats it.
I'm going to picture resizing collage.

[Pouria]

Thank you very much. Nothing could help me more than these pics and the measurments.

[400/6/PAC]

Your welcome.
Sorry about the pictures being too large.
If you need more pics send me a PM.
David

[hutch]

You live in Iran?


Best of luck.

[Pouria]

Yes, I live in Tehran, the capital of Iran. Far away, huh? Classic American cars have many many fans in Iran and I myself am a dodge crazy Most of these cars are being rusted because of the lack of spare parts. People like me are trying to save as much as them by a good rebuilt which always costs us very much. Consider that our monthly income is less than 1000$ and these projects always cost a few thousand! But what can do? Love is love! That's why the help of all buddies here is very valuable for me. I really appreciate your support

Yours - Pouria

[400/6/PAC]

Thats cool that you would go to that length to save a mopar.

[69CoronetRT]

actually there are 4:
hardtop ( or coupe ) Standart
hartdtop ( or coupe )  Brougham
SE Standart
SE Brougham

[69CoronetRT]

.

[Pouria]

Highly appreciated, the pics seem to be part of a catalog. May I ask you send me the entire catalog to pouria_jamali@hotmail.com?

[69CoronetRT]

Those are actualy scans from a Color and Trim book, not a catalog.

[Nacho-RT74]

I think those scans are some incomplete. My car is a hardtop and does have BROUGHAM upper panels. Not original from fact on my car but yes from a Canadian donor.

and yes, forgott to say the base model upper panels ( WL21 ) what are the same than hardtops ( WH23 ) but without woodgrain insert what is juts a added vinyl, but basically the same than hardtops regulars. The big difference is with broughams

[Nacho-RT74]

I have a complete set of RED panels and another BLUE set... Both sets to hardtop with crank hole, driver conditions that needs some touch ups like replace the cardboard on some of them, but NICE anyway

Id like to see the red ones.  Id really like to see an entire interior in red.  That sounds really interesting...   

TRUST ME RED INTERIOR LOOKS MEAN... I love those on E bodies and 2nd gens. I have seen JUST ONE 3RD GEN with complete red interior, was a 73 locally down here in Venezuela. Dunno if painted or not. What is more common here is vinyl interior parts ( headliner, seats, carpet, suvisors and upper panels ) in red and plastic parts in black including dash, moldings and tray. My buddy have one in that way all original and one I parted out was in that way too. Those are the parts I have.