News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

440 Edlebrock heads, spark plugs?

Started by Idaho_grumpy_bear, September 01, 2005, 10:08:17 AM

Previous topic - Next topic

Idaho_grumpy_bear

Can somebody please give me the part number to the Champion spark plugs that fit the Edlebrock heads. I'm tired of burning plug wire boots. I'm looking for the mini plug. Edlebrock should have stayed with the straight plug design. How much did the angled plug improve the performance anyway?      Thanks Kyle

Steve P.

Steve P.
Holiday, Florida

hutch

can anyone answer this question,  I am running into the same issue. 

Thanks,
In the words of Colonel Sanders,,,   "I'm too drunk,,, to taste this chicken"

68MoparCharger

"We recommend Champion RC-12YC (or equivalent) for most applications." - Installation instructions.
"Give me fuel, give me fire, give me that which I desire!" - Metallica

BrianShaughnessy

Quote from: Idaho_grumpy_bear on September 01, 2005, 10:08:17 AM
Edlebrock should have stayed with the straight plug design.


If you don't like the angles,  go get the new MP aluminum heads P5153524.   Edelbrock makes them for MP with straight plugs.   
Black Betty:  1969 Charger R/T - X9 440 six pack, TKO600 5 speed, 3.73 Dana 60.
Sinnamon:  1969 Charger R/T - T5 440, 727, 3.23 8 3/4 high school sweetheart.

Chryco Psycho

Accel has the shortest plugs on the market , sorry I don`t have a part # though

histoy

I'm on another site, and a well respected Canadian engine builder recommends Autolite 2974 plugs.   They are short ones similar to those used in lawnmowers, and he says they run great in big block Mopar engines.