News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Questions on installing remote driver mirror?

Started by bksfld68, March 28, 2007, 08:46:30 AM

Previous topic - Next topic

bksfld68

Does anyone have a pic of how this goes together?  I am wondering if it is supposed to be such a tight fit trying to get the wand through the door.  Also, what does it fasten to, behind the door itself or behind the door panel with the chrome bezel fastening from the front?

Ryan

71charger_fan

I can't speak for '68s, but the '71s had a plastic retainer on the front edge of the door to hold the cable away from the window mechanism. When I replaced my driver's mirror, I just put a large wire tie through from the outside, wrapped it around the mirror cable and pulled it back out through the hole. Then back through itself and clipped off the extra. I don't know how the '68 attaches to the inner door.

NHCharger

Here's a pic from my 72 that shows where the cables are fastened, not sure if the 2nd gens are the same.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel