wiper arm clip

[400/6/PAC]

Anyone know how this clip gose on?
I know it's gotta be simple, but I tried it all different ways and it just dosen't fit right.
Thanks

[Nacho-RT74]

I'll try to take a pic of mine, as far I can recall right now fits toward down and slides down to snap on guide stud

[400/6/PAC]

Thanks Nacho
Man I thought I had that pixel thing figured out.
Sorry about the over sized photo.
David

[Chryco Psycho]

the drivers side arm will have a second very small pin beside the pivot , the clip locks the second arm onto the pin

[400/6/PAC]

Thanks
I see where the small arm attaches,but the clip is giving me a hard time.
Dose the hole in the small arm fit over the pin or dose the clip lock go there and the end of the clip go to the pin.

[Nacho-RT74]

Thanks
I see where the small arm attaches,but the clip is giving me a hard time.
Dose the hole in the small arm fit over the pin or dose the clip lock go there and the end of the clip go to the pin.

clip is inserted on pivot arm, then arm is plugged in to pivot stud and then clip must be slided to clip on stud groove

[400/6/PAC]

That answers my question, Thanks
How can somthing that simple be so hard.
Its always the little things that get me.