Thick copper washers for disc brake hose connection

[histoy]

My '68 has a disc brake conversion on the front.   The passenger side hose connection keeps leaking.  I've tried replacing the copper washers, but they haven't stopped the leak.  I've tried NAPA & AutoZone but they don't have any thicker copper washers that will fit the hollow bolt.   A few months ago I saw an ad in a magazine for thicker copper washers to solve this leaking problem, but I don't remember the vendor.   Does anyone know who's selling them?

[charger Downunder]

Hear ya go Mopar action feb page 91.
you can double up on the thin washers or get them of Mopar p/n 6030084 two per caliper.
Steve

[daytonalo]

OK , the bolt is called a banjo fitting and you must have a copper washer on top of brake line as well as under . If you do , look and see  if there any burrs in they way of copper sealing area . The washers are avail , I have done many retrofits and mix match stuff and you have to get creative . Larry

[histoy]

Thanks for the PN Steve.  When I first got the car the side toward the caliper had 2 thin washers and 1 thin washer on the outboard side, and it leaked.  The guy at NAPA told me that if I used 2 thin washers he would guarantee that it would leak.   I tried a new thin one on the outboard side and a thick one next to the caliper and it leaked too.   I'll order the thick ones from MP and give them a try.  I'll also look for a burr on the parts to see if that's the problem.  Thanks for your help guys!

[histoy]

Steve,

I got the MP washers from our local Chrysler dealer and they were much thicker than anything else I could find at the parts suppliers around here.   I installed them this week and they corrected the leak.   Thanks for your help...Brian