Body Work 69 charger

[venom04]

OK now its kinda hard to explain.  I'm going to start my body work on my 69 charger here within the next couple of weeks and i need some info on how to.  Ive got dents that i will be pulling out and panels that i will be putting in.  Now question is most of the car is not in to bad of shape and still has its original paint but what i want to do is fix parts in the body and put the whole thing in primer.  Now ill be putting floor pans in and trunk pans.  Now when i grind to see the spot welds and get the new panel in do i but filler on the new panel and then just primer it.  Something explaining the process or something would be most appreciative.

Thanks

[FJMG]

It might be worth your while to check out WWW.69HEMI.com. Very informative!!!

[jordyjim]

when you spot weld your panel in,i would use a seam sealer,clean and prime first,any marks in the new panel you can fill and prime, although cos its a personal project i personaly would use body soulder as opposed to filler ithink thats what you mean?..jim

[venom04]

yup that helps thanks

[69hemi]

Thanks for the kudos Fjmg!  Take a look at the sheet metal section and if you have any questions just drop me an e-mail.

Good Luck

[Silver R/T]

from those pics it looks pretty rusty, Id find place to have it soda blasted, that way you can see the real damage rust did to the car.

[Silver R/T]

Id start gathering all the obvious parts that will need to be replaced and once its soda blasted go from there, replacing sheetmetal as needed.

[venom04]

Thanks Silver R/T