Any one have a pic of how a 69 Hemi B body.....

[Just 6T9 CHGR]

Any one have a pic of how a 69 Hemi B body automatic transmission cooler mounts up?.

I'm particulary interested in how it mounts to the grill frame (the bracket that it mounts to)

Thanks in advance 

[tan top]

looking for that info also , going to put the HEMI set up on mine ...........

[Just 6T9 CHGR]

Im trying to sort of copy it but I aint spendin' 400 bucks on a repro

I have a couple of pics including the one fron the service manual but none show how its mounted to the front grill support

[694spdRT]

Just put in a 4 gear and be done with it Chris.   

[Charger-Bodie]

Just put in a 4 gear and be done with it Chris.   

or a 5 gear .............even better

[694spdRT]

Just put in a 4 gear and be done with it Chris.   

or a 5 gear .............even better

Good point...although I do have a 5 gear including reverse! 

[resq302]

Just put in a 4 gear and be done with it Chris.   

or a 5 gear .............even better

Good point...although I do have a 5 gear including reverse! 

Same here.  Nothing beats running em through the gears.

[Just 6T9 CHGR]

yada yada yada.......back on topic please! 

[tan top]

 Chris  this is the only one i have got , not very clear though .  i am not sure if the bracket is welded on the cooler

[694spdRT]

This probably doesn't help much but I want to contirbute something useful. 

Edit: This is a '68....will keep looking through my pics.

[Just 6T9 CHGR]

The brackets bolt onto the cooler....theres someone reproing just the brackets now as well.

http://cgi.ebay.com/ebaymotors/66-70-Hemi-B-Body-Charger-GTX-Trans-Cooler-Brackets_W0QQcmdZViewItemQQcategoryZ10076QQitemZ170068743369QQrdZ1QQsspagenameZWD1V

I mounted mine up pretty decently & fabbed up a bracket for the grill frame.  Hopefully I can get the hardline plummed in so it doesnt look too bad

[tan top]

 pretty sure fine lines  do the complete 4 piece HEMI  trans cooler set up

[mikepmcs]

http://www.finelinesinc.com/

Just in case you need it Chris.

v/r
Mike

[Just 6T9 CHGR]

Thanks guys.  I know they make the line kit (which i might just get because bending lines is a PITA!)

Heres my feeble attempt.   These are all temporary so far.   I mounted the B & M cooler in the "stock" location however I didnt run one of the lines over the rad support like the original.
I tried to keep them both down low for the visual aspect.

I will be painting the lines & fittings black to blend in with the rad support black out....

[resq302]

Looking good Chris.   Looks like you are doing it before you put that correct radiator in as well.

P.S. - Might want to call the cops cause it looks like someone stole your battery.

[tan top]

http://www.finelinesinc.com/

Just in case you need it Chris.

v/r
Mike

   

good find Mike     could not remember their web address    

.

Thanks guys. I know they make the line kit (which i might just get because bending lines is a PITA!)

Heres my feeble attempt. These are all temporary so far. I mounted the B & M cooler in the "stock" location however I didnt run one of the lines over the rad support like the original.
I tried to keep them both down low for the visual aspect.

I will be painting the lines & fittings black to blend in with the rad support black out....

 
                looks good  ...