News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Will a 440 in a RV work in my car?

Started by chargerguy111, March 17, 2007, 02:33:19 PM

Previous topic - Next topic

chargerguy111

I recently found a 73-74 440 in an RV camper.Will this work in my 68 Charger?The water pump looks different,but surely the right one for my car will bolt on.Anybody know anything about this swap?Thanks.

67_Dodge_Charger

Motormounts, waterpump housing, exhaust manifolds and pulleys will be different but it should work fine. Did you get the casting number on the block?

Robert

daves68

YEP!! In the process of doing it myself. Engine mounts, exhaust manifolds are different, water pump housing may or may not work- depending on radiator in/out location.  NEEDS an different cam! It May have rotators on the exhaust valves. Not necessarily bad for street use but may cause spring binding if the cam lift is to high. Good luck and have fun with it.
Dave

LargerCharger383

 :popcrn: I've been eyeing up a 440 RV myself...