Do other B-body pillar post moldings fit 2nd gen Chargers?

[bull]

Such as Coronet, Roadrunner, etc.?

[8WHEELER]

YES, 68 TO 70 Except convertables, and they are big bucks and harder to find.

I wish they would repop the a-pillar covers, the first time I broke one of mine
was in 79 pushing the car in the staging lanes, cracked right in half, most of the
time the top corners are broke and or gone.

Dan

[resq302]

Supposedly, Tony D'Agostino is in the process of reproing these.

[bull]

Supposedly, Tony D'Agostino is in the process of reproing these.

Which? The B-body or the A-body Dan mentioned?

[8WHEELER]

Supposedly, Tony D'Agostino is in the process of reproing these.

Which? The B-body or the A-body Dan mentioned?

Curtis
I thought you ment the ''A-Pillar post cover? I ment for B-Body's. I know little about A-Body's, so
I was not talking about them.

Are you talking about the 1in wide stainless piece that presses on the rear of the roll up door glass?
if so, no, nobody does those yet, they polish up just fine.

Dan

[bull]

I meant the plastic interior part that mounts vertically on either side of the windshield.

These things:

[Charger-Bodie]

I meant the plastic interior part that mounts vertically on either side of the windshield.

These things:

they will work off of any 2 door b body except convert BUT the ones from satelites and such can have a small piece of trim screwed to it so you may have a couple of holes to deal with , im not saying all of them do just the higher trim packages

[8WHEELER]

I meant the plastic interior part that mounts vertically on either side of the windshield.

These things:

Those are A-Pillar post covers.

Dan

[bull]

So it's A-pillar on a B-body, right? Sorry, I misread.

[resq302]

Yes, those covers that you pictured is what Tony D'Agostino is supposed to be working on repro'ing.

[bull]

Yes, those covers that you pictured is what Tony D'Agostino is supposed to be working on repro'ing.

Thanks. I checked out his site but I didn't see anything about them yet.

[resq302]

I am guessing that they are still in the mold forming stage.  It was about a year or so ago that I was talking to him about it.

[bull]

Any idea what he plans on charging for them?

[resq302]

no price yet.

[Ghoste]

You can bet that Tony won't be selling them for only slightly over cost though. 

[bull]

I e-mailed Tony about them and this was his response:

HI
YES I AM MAKING THOSE
THEY ARE CLOSE TO BEING DONE
I HOPE TO HAVE THEM IN HAND WITHIN 2 MONTHS
PROJECTED PRICING IS APPROXIMATELY $140-$150 PER PAIR

That price isn't too bad. Roughly twice what you can get used ones for on Ebay.

[69bronzeT5]

I was actually just wondering if B-body pillar post moldings fit 2nd gen Charger. I only got one of mine and its a pain in the a$$ trying to find another one out of a Charger but now I know that most B-body ones work, it will be easier.

[Brock Samson]

yeah all the B 2nd gen body, A pillars are the same... of course the daytona 500 SBs have the areo ones Daytonalos' making..

[Corellian Corvette]

What's Tony's site?

[Brock Samson]

i misunderstood the question and failed to read thew previous posts.. my bad.. 

[bull]

What's Tony's site?

http://tonysparts.com/

[69bronzeT5]

Im guessing convertable ones dont work on hardtops?

[bull]

You could guess, or you could go back and read what 8WHEELER and 1hot68 wrote.

[Ghoste]

Don't encourage him Bull, tonights drive by postings had a special mission.  Accomplished btw.

[bull]

Don't encourage him Bull, tonights drive by postings had a special mission.  Accomplished btw.

What? To get him to the 1,000 post landmark?