engine almost ready to fire

[dodgeterm]

here is my 66 factory G code car with a replacement 400.  all I need to do is add some liquids and a few finishing touches.
Its a 74 400,  std bore.  stock pistons for pump gas (8.5:1 ??),  I running this cam:

Cam Cams XE262H-10 Intake/Exhaust
Lift: 0.462"/0.47", Duration At 0.006 Tappet Lift: 262°/270°, Duration At 0.05: 218°/224° Lobe Lift: 0.308/0.313 Lobe Separation: 110°.

3.23:1 rear 727...  and thats a Holley 570cfm 4160

[mikepmcs]

Congrats.

Take some video of the fire up.

v/r
Mike

[firefighter3931]

Looks good !  The comp xe262 shoild run pretty descent in that engine. One thing i noticed in the pic ; your alternator is missing a spacer that runs between the front and back ears on the top bolt. I would get one on there asap because the aluminum (ear) can snap off if there is no support between the front and back. 


Good luck with the fireup.



Ron

[tan top]

here is my 66 factory G code car with a replacement 400.  all I need to do is add some liquids and a few finishing touches.
Its a 74 400,  std bore.  stock pistons for pump gas (8.5:1 ??),  I running this cam:

Cam Cams XE262H-10 Intake/Exhaust
Lift: 0.462"/0.47", Duration At 0.006 Tappet Lift: 262°/270°, Duration At 0.05: 218°/224° Lobe Lift: 0.308/0.313 Lobe Separation: 110°.

3.23:1 rear 727...  and thats a Holley 570cfm 4160

looks good  ....nice work