dull day so I got some powder coating done!

[The Ghoul]

the charger bits


and my subaru rims

[Silver R/T]

rims look nice, do you have your own setup?

[The Ghoul]

Yep I'm the owner/operator of www.smallbatchcoatings.com

[OttawaCharger]

Nicely done 

[jackel440]

sweet,nice job
I just bought some new tubular upper control arms for my 72 yesterday at the swap meet.and am trying to decide if i want to take the time and money to get em coated or just rattle can them and then put em on.

[The Ghoul]

sweet,nice job
I just bought some new tubular upper control arms for my 72 yesterday at the swap meet.and am trying to decide if i want to take the time and money to get em coated or just rattle can them and then put em on.

well,
If it helps you make the call, I would do them for $50.
That includes media cost, sand blasting, and shipping back to you.
I always recommend that my customers check out this site first to get a feel for what color they might like.
http://roseyspowdercoating.biz/osCommerce//catalog/index.php?osCsid=a43001c87d92f8766675c0ac64830c39

[Goldfinger71]

Good luck Ghoul with your business!

[The Ghoul]

Good luck Ghoul with your business!

Hey, thank you!
Its been going very well so far. Just enough rolling in to keep me busy. Its also a great source of project funds!

I think the rims work very well with the car!

[K9COP]

Two door! That's a rare Scoob. I've got an '89 Skyline GTR back home (UK) and I do miss it. However, I'm sure the '68 will cure that. Where are you? Trying to see if it's viable to send you stuff to powder coat.

[Silver R/T]

what kind of oven you got?

[Steve P.]

PIZZA...............


Good luck Goul. I hope it takes off for you..  I thought of doing a home version of it, but I am so out of room I can't stand it.. 

Good luck bro..........

[OttawaCharger]

what kind of oven you got?

thats a good question!  I'd like to know as well.  I'm currently looking for an old freezer that I can put oven elements into so I can have a 20 Cubic foot curing stove but I'm sure there is a better solution than that!   

[tan top]

 nice job on the parts.. look good

[daytonalo]

I might be selling my oven , 7' x5' x 4 ' getting out of the buss , 5k for it , natural gas .

[Ghoste]

I thought it was bad to use a gas oven for curing powder coat?

[Silver R/T]

why is that?

[K9COP]

Two door! That's a rare Scoob. I've got an '89 Skyline GTR back home (UK) and I do miss it. However, I'm sure the '68 will cure that. Where are you? Trying to see if it's viable to send you stuff to powder coat.

hello.. Ghoul... ?

[daytonalo]

Been in the buss for ten years , I'm moving . it is a convection oven , for those who don't know , it has a circulating fan on top . I will tell you quick to poison your family , go ahead and use you kitchen oven and then cook in it . Hope you have life insurance .

[Ghoste]

I thought the other bad thing was the fumes around the open light, that you had to use an electric?  Obviously not if you've been using it for ten years Larry.
And yes, the part about using the family cookstove is bad too, glad you mentioned that because I think there are a lot of people who do exactly that. 

[daytonalo]

Powderfumes are not explosive