News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Torsion bar seals

Started by histoy, March 03, 2007, 06:16:34 PM

Previous topic - Next topic

histoy

Does anyone produce the large round torsion bar seals that could be installed without having to remove the torsion bars?    I'm hoping to find some type that might wrap around the bar.

Charger-Bodie

you can get real ones from mp but i dont know of any like you are looking for id just slide out the t bars and put on correct ones its noy very difficult
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

histoy

Just a little gun shy about removing the bars.  I've never done that before, and I've heard other guys say that they had a hard time getting their's out.   Just looking for a easier way.

Nacho-RT74

IF THEY DO EXIST I won't trust on them too much since those boots are sealed to do right its job... don't you think ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html