News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

WOW! Lots of new 2nd Gen Charger parts out over the last few weeks!

Started by Corellian Corvette, February 28, 2007, 02:46:26 PM

Previous topic - Next topic

Corellian Corvette

Searching around the net the other day, and MAN, I hadn't realized all the new 2nd Gen Charger parts that have been repro'd over the last few weeks. It's unbelievable! I've seen some of these posted (and some may be old), but here's a list of all the parts I've found that look new within the last month!

It's a great time to be restoring a Charger, that's for sure. The pieces aren't cheap, but at least you can get them!

At this rate, there are only a couple more parts I'd like to see that are hard to find (or expensive to restore)

Interior Upper Door Pads!!
Grille Headlight Pods (assuming the centers are being made)
Rear Valance Lower Chrome trim (they make the corners, why not the long portion!)
Automatic Console Lid (I assume this is coming soon)
A/C Heater Box Seal kit (I know Detroit Muscle Tech is working on this)
Rear Window Stainless Trim
Vent Window Assembly (they're making these for the GM A Bodies and Mustangs now!)
Guage MOPAR emblem plug (the one that goes between Speedo and Tach)
Fenders!!

Otherwise, this is everything I've found. Am I missing anything?

68 Rear Defog Bezel (P&G Classics)
http://cgi.ebay.com/ebaymotors/1968-New-Mopar-Charger-R-T-Rear-Defog-Bezel_W0QQcmdZViewItemQQcategoryZ80739QQihZ002QQitemZ120092305066

68 Blank Defog Delete Bezel(P&G Classics)
http://cgi.ebay.com/ebaymotors/1968-New-Mopar-Charger-R-T-Rear-Defog-Dele-Bezel_W0QQcmdZViewItemQQcategoryZ80739QQihZ002QQitemZ120092305112

Complete Front Parking Lights (Charger Specialties)
http://www.chargerspecialties.com/cs689%20pic.jpg

A/C Vacuum Hose Kit
http://cgi.ebay.com/ebaymotors/New-66-69-B-Body-Charger-GTX-AC-Heater-Vacuum-Hose-Kit_W0QQcmdZViewItemQQcategoryZ10076QQihZ007QQitemZ170083051794

Gauge Lenses (P&G Classics)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=120089250368&rd=1,1

Gas Cap Trim Ring (these were hard to get for a while)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=320021038166&rd=1&rd=1

Headliner Bow Retainers
http://cgi.ebay.com/ebaymotors/Mopar-66-76-A-B-Body-Headliner-Bow-Retainer-Set_W0QQcmdZViewItemQQcategoryZ10076QQihZ007QQitemZ170079848133

Correct Molded Dash/Underhood Vacuum Kit
http://cgi.ebay.com/ebaymotors/New-68-69-Charger-Correct-Vacuum-Headlight-Hose-Kit_W0QQitemZ170085974489QQihZ007QQcategoryZ10076QQrdZ1QQcmdZViewItem

Headlight Vacuum Pods (P&G Classics)
http://cgi.ebay.com/ebaymotors/1968-69-New-Mopar-Charger-Headlight-Actuator-Set_W0QQcmdZViewItemQQcategoryZ140737QQihZ002QQitemZ120089250043

Quarter Panel End Caps (P&G Classics)
http://cgi.ebay.com/ebaymotors/68-69-70-NEW-Mopar-Charger-Quarter-Panel-End-Caps_W0QQcmdZViewItemQQcategoryZ140708QQihZ002QQitemZ120089249163

Heater Control Bezel (P&G Classics)
http://cgi.ebay.com/ebaymotors/68-70-Mopar-Charger-Roadrunner-GTX-Heater-Control-Bezel_W0QQcmdZViewItemQQcategoryZ34197QQihZ002QQitemZ120089663781

Console Light Wiring Harness (P&G Classics)
http://cgi.ebay.com/ebaymotors/1966-70-Charger-Roadrunner-Auto-Console-Light-Wire-BUP_W0QQcmdZViewItemQQcategoryZ140736QQihZ002QQitemZ120090756745

Auto Backup Lamp Switch (P&G Classics)
http://cgi.ebay.com/ebaymotors/1966-70-Charger-Roadrunner-Auto-Console-Back-up-Switche_W0QQcmdZViewItemQQcategoryZ140736QQihZ002QQitemZ120090756783

Magnumcharger

All is definately looking good for Charger restorers.....check the threads on this board.....there are new second-gen rear quarter panels (complete) just about to be released.....

http://www.weracehardcore.com/


Which leaves me with a dilemma. I've just finished welding on a set of the thin reproduction quarters that are avaliable now. I'm thinking of waiting for the new full quarters to be released, and cut off these ones to put the "authorized" versions on.....
1968 Plymouth Barracuda Formula S 340 convertible
1968 Dodge Charger R/T 426 Hemi 4 speed
1968 Plymouth Barracuda S/S clone 426 Hemi auto
1969 Dodge Deora pickup clone 318 auto
1971 Dodge Charger R/T 440 auto
1972 Dodge C600 318 4 speed ramp truck
1972 Dodge C800 413 5 speed
1979 Chrysler 300 T-top 360 auto
2001 Dodge RAM Sport Offroad 360 auto
2010 Dodge Challenger R/T 6 speed
2014 RAM Laramie 5.7 Hemi 8 speed

Corellian Corvette

Hadn't seen that ad. Looking forward to see how the fenders are. Of course, I just got 2 original fenders (at quite a price) so I'm sort of commited here.

I replaced my rear quarters with Goodmark ones and the body guy thought the metal and fit were good. I know there are other repros out there, but are the goodmark ones bad?

chargerboy69

Quote from: Magnumcharger on February 28, 2007, 03:13:11 PM
All is definately looking good for Charger restorers.....check the threads on this board.....there are new second-gen rear quarter panels (complete) just about to be released.....

http://www.weracehardcore.com/


Which leaves me with a dilemma. I've just finished welding on a set of the thin reproduction quarters that are avaliable now. I'm thinking of waiting for the new full quarters to be released, and cut off these ones to put the "authorized" versions on.....

I put quarters on mine 5 years ago, and they look great. Bought them from Year One I believe. I don't think the ones they make now suck. I would keep them on. Just my opinion though.
Indiana Army National Guard 1st Battalion, 293rd Infantry. Nightfighters. Fort Wayne Indiana.


A government big enough to give you everything you need, is a government big enough to take away everything that you have.
--Gerald Ford


                                       

BigBlockSam

i'm gonna pick up  the dash   from p&g for my 68 r/t . that will make the interior pop . Rene
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

TruckDriver

PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

Vainglory, Esq.

Quote from: Magnumcharger on February 28, 2007, 03:13:11 PM
All is definately looking good for Charger restorers.....check the threads on this board.....there are new second-gen rear quarter panels (complete) just about to be released.....

http://www.weracehardcore.com/


Which leaves me with a dilemma. I've just finished welding on a set of the thin reproduction quarters that are avaliable now. I'm thinking of waiting for the new full quarters to be released, and cut off these ones to put the "authorized" versions on.....

Okay, those are definitely the goodmark ones.  They were supposed to be out last year, but they're sort of on hold right now.

White68RT

I bought one of those 68 rear defog bezels. Not a bad part at all. Not cheap (about $40) for a small chunk of plastic but I've been looking to find one for ~20 years so for the price of a tank of gas (freakin A-rabs) I guess it's worth it. Came fast also.

Nacho-RT74

I think we 3rd gens owners have more parts that 1st gen owners, but still we need A LOT MORE since almost all available are trash
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html