News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1966-1967 charger question

Started by Rolling_Thunder, February 21, 2007, 09:47:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rolling_Thunder

February 21, 2007, 09:47:30 PM
Hey guys - i got a 66-67 charger I need to pull the trim off of - specifically the trim that runs along the top of the fenders - are these held by nuts ?  if so how do i get to them ?  I can't see any real way of even seeing them let alone getting access to them
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

Ctcharger

#1
February 22, 2007, 09:36:22 AM
The fender trim is held on with plastic clips, except the front couple of holes.  These have a acorn nut holding them.  I had the fender off the car when I took the trim off so I could get to the back side easy.  Go slow.  Mine is a 66, the fender tips(turn signals) on a 67 may be different.  I believe from the door back is held with clips. 

Ghoste

#2
February 25, 2007, 08:04:01 PM
Everything he said, plus, try not to break them if possible as they are hard to find.  You may want to check the tech section on the 66-67 forum or David Walkers world famous 66-67 Charger Source Guide.  It used to be at   www.davidwalker.net/charger
The other site is in my sig.
Print
Go Up Pages1
User actions