News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Shifter Linkage Hole Diameter

Started by Chris 69, February 20, 2007, 10:20:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Chris 69

February 20, 2007, 10:20:00 PM
I am converting my '68 Charger to a console automatic.

What is the stock diameter of the hole in the floor for the linkage to pass through?

Thanks,

Chris

UFO

#1
February 21, 2007, 09:10:44 PM
There should be an outline on the floor pan and dimples for the screw holes.It was on mine anyway.

Chris 69

#2
February 23, 2007, 12:17:57 AM
The dimples for the holes are there. However, I do not remember an outline on the floor pan for the hole, just a smooth flat area. I'll check in more detail this weekend.

I asked the question since I thought I would get the Charger to the welding shop before the shifter boot an bezel arrive from PG Classics. But now, since the shop will be busy this weekend, I should receive the bezel before I can go to the shop, so I can use it as an outline.

Chris
Print
Go Up Pages1
User actions