News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

console conversion

Started by charger_mike75, February 28, 2007, 08:43:59 PM

Previous topic - Next topic

charger_mike75

I am getting started with the console and floor shift for my 68 charger, I have rounded up all the parts except for the bracket that mounts to the transmission. this looks like something i could fabricate but i need a good pic of one mounted on a car so i can see which side of the speedo cable the shift linkage is supposed to be on. can any one help me out with this, it would be greatly appreciated.

Daytona R/T SE

You can get a new one from Wilson's productions for $45

ph. 314-448-RTSE mornings
     314-487-3298 evenings

als-attic@worldnet.att.net 

Or if you're cheap like me get one off of a Cordoba or Magnum in the junkyard...

charger_mike75

Thanks, I didn't know anyone was making them. I think I'll try the salvage yard before I shell out $45+ for one