440hp 727 kickdown linkage

[charger01]

does anyone have a pic handy of a kickdown and throttle linkage from a 440 with a 727.  Its in my 69 charger with a 4 barrel edelbrock carb.  I have a bunch of linkages laying around and cant figure out how to piece em all together. thanks in advance guys

[original72]

im not sure but i think in 69 they still had the 3 piece kickdowm linkage... you might be better off with a later model with a one piece rod but im not sure if it will clear the firewall....

[8WHEELER]

68 440HP with a Holley. kickdown would be the same just the bracket on the carb is not the same.

Dan

[Beer]

Not sure if this will help

Here is a scan from a manual



Cheers
Beer

[charger01]

that is very close to what I have except the bracket is a little different.  Is the bracket for the 69 held down by 1 or 2 intake bolts?  Another quick question.  My car was a factory 383 2 barrell car.  There isnt any difference in the throttle cable is there?  Thanks for all the help guys

[John_Kunkel]

This is correct for the 3-piece linkage:

[charger01]

thank you for the pics gentelmen. throttle cable is the same right?

[Ghoste]

Yes.