News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

back window installation questions

Started by Dennis K, February 08, 2007, 01:58:10 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dennis K

February 08, 2007, 01:58:10 AM
Sometime in the next month or 2 my Charger will be getting the back window put back in. When I took it out, I found that there were a couple of small brackets on the bottom of the channel with small rubber blocks on them. Do these have to go back in? If so, does anyone know where I can get the small rubber blocks? I don't think I kept the ones that were there. I think maybe they just used them at the factory to get the window in the right location, but then I started wondering if the window could somehow slide down if the rubber blocks were not there. Anyone know if they need to be there? Thanks.

Charger-Bodie

#1
February 08, 2007, 03:13:04 AM
what year? and yes they should go back in to keep it from sliding, if you get a 3m butyl tape kit it will have blocks included
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

bandit67

#2
February 08, 2007, 08:53:49 AM
All of the glass kits I have bought have had the rubber blocks in there. The glass company guys just carry a rubber block with them and cut a piece from them.  Any thing soft, but solid enough to keep the glass from sagging down during the summer heat will work.
Print
Go Up Pages1
User actions