source for quarter panels for 3rd gen charger

[1958300]

Anybody know where I can buy new quarter panels for a 1972 Charger? Year One doesn't list them in their catalog, and AutoBody Specialties says the ones they have are hand formed and not very good. Apparently Goodmark has abandoned any work they had in progress for the 3rd gen chargers, so I am looking for another source. Any help would be appreciated.

[jasonfromIKILLYA]

holy crap.  that took me a long time.  Here they are: http://www.showcars-bodyparts.com/charger.html

Paddack used to sell them, but I guess not anymore.  Damn that was hard to find!  I need to buy one before these dissapear too!

[ACUDANUT]

 Already been addressed:***** http://www.dodgecharger.com/forum/index.php/topic,21619.msg259557.html#msg259557

[41husk]

I could use some bottom wheel well quarters, probably need to dig up a doner or bondo buggy it, until repo parts are available.

[ACUDANUT]

 Chances are, they will never made unless some multi-millionaire has a desire to fund the project. Hey, let's all send Goodmark Ind. continious e-mails begging them to help us out. NOW, THAT'S A IDEA.

[73chargers4404]

I had a post on this yesterday bitching about the same thing its on page 2 in general diss.you guys saved my ass and alot of money i allmost ordered a quarter panel off ebay ,but before i did i asked the guy if they where hand formed with a machine or stamped ,and someone said on here that the hand formed ones sucked.and guess what sfter 3 times asking him he said they where hand formed ,heres a link
http://cgi.ebay.com/ebaymotors/QUARTER-PANEL-DODGE-CHARGER-1973-74-NEW_W0QQitemZ140081139122QQihZ004QQcategoryZ42611QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting

[twilt]

You wouldn`t have been the first sucker to buy them.  I honestly dont understand    how anyone could look at that and possibly think it was a quality or for that matter........ usable product. 

[Charger1973]

That looks terrible.. 

[73chargers4404]

the paint or coating on it looks allmost like the one i bought last year that was stamped .but it dont look as round.and i was wondering why i couldnt see the indention for the side marker in the picture he probley couldnt reproduce it so he took as dark picture of that section.

[73chargers4404]

you start to lose hope in finding one and suddenly this peice of shit starts to look good and then a moment of cleardy and u realize that might as will flush your money in the toilet if u buy it.i have tied to buy the left side 3 damn times now i have the money get tired and spend it on other parts then save up again3rd time now, its a bad very cruel cycle.

[AKcharger]

What exactly is a "hand-formed" 1/4 panel? Like some one used a hammer and dolly to form it?

[jasonfromIKILLYA]

I know I'm new here and it's easy to miss my posts, but if you check the link I put up, and scroll down the page you will find new steel panels.

[twilt]

I know I'm new here and it's easy to miss my posts, but if you check the link I put up, and scroll down the page you will find new steel panels.

Yeah.... and those Showcars 1/4`s are priced at $110 each....which means that they are hand formed pieces of crap too. Bottom line here that some people are having a hard time understanding is that you dont get a quality (usable)  1/4 skin for around $100

[Charger1973]

I have never heard anything good about that showcars place

[mopar_madman]

ok guys I bought the hand formed ones off ebay, they suck, don't fit right ,thinner metal. stay away you would be better off paying a good metal guy to hand make them specifically to the car (I think Nacho had that done to his) As for show cars in canada I dealt with them, he said the faster I got the money in his paypal he would ship right away. Once he got the money took over a month to ship something he said he had in his warehouse, just piss poor buisness in my opinion. A place called Tabco out of Ohio was die stamping the 73-74 panels I found one and they were good quality no real issues (my wheel opening mould. fit a little funny) but was a nice aftermarket compred to some. Unfotunatly they stopped making them. I'm sure there are some floating around, just keep looking.

[73chargers4404]

jason i called the guy at that link and he couldnt get the die stamped ones rite now,just the hand fromed ones for now ,and  AKcharger hand formed is with a bead roller and metal brake .die stamped is pretty mutch what they do at the factory.hay mopar_madman  was this guy the same one you bought yours off of ,he dont say shit in his discription about them being hand machined.someone needs to put in his feed back that hes making the parts him self. i read some of his feed back he charges 145 for the part 100 for shipping and if you dont like them he will give your money back all but the shipping ,thats a croke of shit so youll be out 200 for nothing.

[AKcharger]

AKcharger hand formed is with a bead roller and metal brake .die stamped is pretty mutch what they do at the factory...

That sounds like a LOT of work, a lot more than $100 worth

Thanks

[73chargers4404]

i have found a right side they is die stamped i asked ,but it is high,they dont have the side i need left.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUS%3A1&viewitem=&item=260036735969&rd=1

[mopar_madman]

jason i called the guy at that link and he couldnt get the die stamped ones rite now,just the hand fromed ones for now ,and  AKcharger hand formed is with a bead roller and metal brake .die stamped is pretty mutch what they do at the factory.hay mopar_madman  was this guy the same one you bought yours off of ,he dont say shit in his discription about them being hand machined.someone needs to put in his feed back that hes making the parts him self. i read some of his feed back he charges 145 for the part 100 for shipping and if you dont like them he will give your money back all but the shipping ,thats a croke of shit so youll be out 200 for nothing.

Yes its the same guy, this was about 3 years ago and he had sold a pair on ebay and i contacted him privatly to see if he had more so I couldn't leave any feedback on ebay. I ended up using them for small patches. they are just flat sheetmetal with 2 bodyline bends (in the wrong spot) and a beadroller wheel opening on thinner metal. You would be better buying these (if your going to ) from JC whitney they sell they same ones but they have a 30 money back return policy.

[mopar_madman]

i have found a right side they is die stamped i asked ,but it is high,they dont have the side i need left.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUS%3A1&viewitem=&item=260036735969&rd=1

those are probably the good ones here's a link that shows a 73 charger resto that has a pic of the good die stamped panels  http://partsused.homestead.com/partspage.html

[73chargers4404]

yah these are the good ones ,i posted it for the guy that started the post here are the good quarters that are stamped .http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUS%3A1&viewitem=&item=260036735969&rd=1     this is the only place that have them everyone else list them but dont have them.

[ACUDANUT]

 Okay, Problem again Guys.  Those are for 73-74 Chargers.  Maybe I am wrong, but the issue was for 71-72 CHARGERS. 

[moparguy01]

the post does say 3rd gen charger. They should have been more specific in the title.  the 73-74 are still third gens.

[ACUDANUT]

 You have a point, but he also stated 72.  73-74 owners are lucky, they have a source. But us 71-72 guys are screwed.