News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

pai,nting plastics

Started by jordyjim, February 03, 2007, 04:30:58 PM

Previous topic - Next topic

jordyjim

im sure someone was asking about this the other day, cant find the thread now? anyway what id is i scuff the plastic with a red pad,clean, give it a coat of clear adhesion primer let it dry dust a coat of fastbuild primer as an etch, then give it a good coat of primer flat it with a 320grit for 2 pack ready mixed or wet sand with 1500 if im using basecoats ive still got trucks 3yrs on and no problems...jim.. hope you understand the british lingo i have probs with your terms sometimes.